TM P226 Hammer assembly question

[TooTall]

I've been installing a Guarder metal body on a TM P226. Everything's coming together, some points need some more filing. However, I ran into a problem:

Diagram with numbers here



The "firing pin" (32) from the hammer assembly was not popping back, so I removed the hammer assembly, removed the 2 screws, removed the cover (28), removed the spring (36), removed the hammer locking part (35), then I saw the spring on the back (34) and placed it back.

When I was putting it back together, I just couldn't remember how to put the spring (36) back on. I took pics with my camera every step, but when I try to transfer them to my PC something happened and it just won't show them. So, apart from a maybe broken camera I'm also stuck on this part.

The spring (36) needs to be put so that the hammer locking part (35) pushes back against the hammer. Could anyone take out their hammer mech, remove the cover and take a pic of the spring? And, maybe explain what the best way of putting it in is, because I'd hate for the thing to jump loose while I'm trying to fit it.

Hope someone can help me out, since this is really bugging me. I'm also fitting a pair of Hogue Grips and internal mods.

[kayakmaxx]

I found #36 to be an easy one to reinstall, however #33 is giving me problems. If you still need it, I can take a pic and send it to you, But if you can figure out what the hell to do with that evil spring #33 please send me a picture or something.

[Kos-Mos]

welll just keep trying for now...

i opened mine to clean it (some sand ran in the whole gun... damnit) and managed to reassemble it without any pics.

I am not superman and I don't have any overwhelming powers, so you should be able to do it....

I will try to get a cam to take some pics soon.... if you still need help by then...

here is my MSN, I can try to go at a web cafe with the parts to show you...


gawyn_rhuarc@hotmail.com

[Fidget11]

Originally Posted by TooTall

I've been installing a Guarder metal body on a TM P226. Everything's coming together, some points need some more filing. However, I ran into a problem:

Diagram with numbers here



The "firing pin" (32) from the hammer assembly was not popping back, so I removed the hammer assembly, removed the 2 screws, removed the cover (28), removed the spring (36), removed the hammer locking part (35), then I saw the spring on the back (34) and placed it back.

When I was putting it back together, I just couldn't remember how to put the spring (36) back on. I took pics with my camera every step, but when I try to transfer them to my PC something happened and it just won't show them. So, apart from a maybe broken camera I'm also stuck on this part.

The spring (36) needs to be put so that the hammer locking part (35) pushes back against the hammer. Could anyone take out their hammer mech, remove the cover and take a pic of the spring? And, maybe explain what the best way of putting it in is, because I'd hate for the thing to jump loose while I'm trying to fit it.

Hope someone can help me out, since this is really bugging me. I'm also fitting a pair of Hogue Grips and internal mods.

when i did the guarder kit i never broke my gun down that far since there was not a need to. then again i didnt get sand in it either. as for the hogue's you do know that you need some dremel time to make it work because of a size conflict.