KJW Beretta Trigger (how to remove)

Newtothis · March 12th, 2007, 16:09

I was wondering... how to remove the trigger so i can fix the trigger spring on my KJW Beretta.

Thank You

de-mix · March 12th, 2007, 16:53

If you don't have this already,
Exploded Diagram
Possibly part #37?

Newtothis · March 12th, 2007, 17:44

Yes it is part #37. So it appears like i have to dismantle the whole gun?

de-mix · March 12th, 2007, 18:03

Did your gun include a manual or no?
First step is removing the slide from the lower frame.

From Arnies
"Field stripping the M9 is quite simple: release the mag; cock back the hammer; push down the button above the trigger guard on the right side while rotating the take down lever on the left side clockwise by 90 degrees; and slide the slide assembly right out. Getting the spring guide rod out can be a bit more trickier. You need to first pull out the end that's inserted inside the chamber, then rotate the springer guide rod by 180 degrees, and then slide it back out under the chamber."

Newtothis · March 12th, 2007, 19:01

I do not have manual (the gun didn't come with one)

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 12th, 2007, 16:09	#1
Newtothis Trader rating Join Date: Jan 2006 Location: DELETE ACCOUNT	KJW Beretta Trigger (how to remove) I was wondering... how to remove the trigger so i can fix the trigger spring on my KJW Beretta. Thank You

March 12th, 2007, 16:53	#2
de-mix Trader rating Join Date: Dec 2001 Location: Milton Ont.	If you don't have this already, Exploded Diagram Possibly part #37? __________________

March 12th, 2007, 18:03	#4
de-mix Trader rating Join Date: Dec 2001 Location: Milton Ont.	Did your gun include a manual or no? First step is removing the slide from the lower frame. From Arnies "Field stripping the M9 is quite simple: release the mag; cock back the hammer; push down the button above the trigger guard on the right side while rotating the take down lever on the left side clockwise by 90 degrees; and slide the slide assembly right out. Getting the spring guide rod out can be a bit more trickier. You need to first pull out the end that's inserted inside the chamber, then rotate the springer guide rod by 180 degrees, and then slide it back out under the chamber." __________________

March 12th, 2007, 17:44	#3
Newtothis Trader rating Join Date: Jan 2006 Location: DELETE ACCOUNT	Yes it is part #37. So it appears like i have to dismantle the whole gun?

March 12th, 2007, 19:01	#5
Newtothis Trader rating Join Date: Jan 2006 Location: DELETE ACCOUNT	I do not have manual (the gun didn't come with one)

KJW Beretta Trigger (how to remove)

Doctor's Corner