|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 23rd, 2007, 02:22
|
#1 |
|
Nozzle head not functioning..? any idea?
I upgraded my CA m15a4, but now the nozzle head is not functioning. It goes back and forth, but it does that in a really small range. I checked the gearbox several times already, it looks fine. But every time i opened the gearbox, the sector plate is bending. It seems like the plate did not go through a full cycle.
The spring i upgraded is a PDI150, new guarder cylinder set and new spring guide. Any idea why this happens.......? |
|
|
|
March 23rd, 2007, 02:27
|
#2 |
|
Ok look reposting this is not going to get you a responce any faster. People are sleeping so don't expect a answer tell tommorow.
For those that dont believe http://www.airsoftcanada.com/showthread.php?t=36337 http://www.airsoftcanada.com/showthread.php?t=36334 Just a side note, but what the crap. This is the third person in two days that I have told about posting more than once.Why I ask? Why? |
|
|
|
|
March 23rd, 2007, 02:34
|
#3 |
|
|
sorry,,, its my first post.....
...............
|
|
|
|
|
March 23rd, 2007, 03:32
|
#4 |
|
http://www.mechbox.com/site/mechbox/...ade-video.html
see if that link helps you out. i also have a really dumb question to ask,,,,when you disassambled the piston head from the piston to change the spring did you put it back together properly? i know it sounds like a bad question to ask but your symptoms are stemming from your re assembly so i thought i would ask. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
