|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 18th, 2007, 16:12 | #1 |
AEG Firing problem
Hi, I have a new airsoft gun and i was shooting it around then it just stopped shooting.
I checked the fuse and the fuse is still good. when i hook the battery up and press the trigger it sounds and feels like the motor is trying to move the piston but it cant move it. Please help me out i would really apreciate it. |
|
June 18th, 2007, 16:22 | #2 |
What voltage battery are u using?
Try recharging your battery? It sounds like u dont have enough juice to complete the cycle and its getting stuck at the end |
|
June 18th, 2007, 16:33 | #3 |
Official ASC Bladesmith
|
I vote for his battery needing a recharge!
|
June 19th, 2007, 00:42 | #4 |
i have an 8.4 volt battery
ill try recharging it and see what happens |
|
June 19th, 2007, 01:51 | #5 |
__________________
"Any punk can shoot from across the room but it takes a real man to get close enough to stab" "Why cause a huge disturbance when you just wanna kill ONE guy?" - Chris Rock |
|
June 19th, 2007, 19:51 | #6 |
its not the battery, i charged it up and its still stuck, but it feels like the battery has more power trying to move the piston
|
|
June 20th, 2007, 03:21 | #7 |
What's the mah of the battery?
__________________
"Any punk can shoot from across the room but it takes a real man to get close enough to stab" "Why cause a huge disturbance when you just wanna kill ONE guy?" - Chris Rock |
|
June 20th, 2007, 23:24 | #8 |
1100
i might have not charged it long enough how do u tell if its fully charged? |
|
|
Bookmarks |
|
|