CA33e re-wire/battery

[Jiggiwatt]

I recently had the stock on my Classic Arm CA33e break when my improvised sling-point snapped. I'd prefer to avoid spending $100 after shipping on a replacement, so I'm going to add a folding stock to it that a friend has for $35.

However, when it comes to the battery, I can't figure out what's going to work. I can rewire to place the battery in the foregrip, but the only size battery I can fit in it is 10cm x 3.5cm x 1.75cm. I may be able to fit another configuration in it, but I'd rather know for sure before I buy a battery. I need this in action by the 16th.

Anyone have any experience with alternate battery placement on a CA33e ?

[Splashx]

I have a G3Sg1, so it's *nearly* the same thing as a Ca33e, in the foregrip, you only be able to fit a mini bat in the forgrip 8.4v-9.6, but I'm not sure if the 9.6v fit in there, I never tried. Or you can use a mag buttstock holder, and place the battery in. It can be attached on you Ca33e.

[Jiggiwatt]

What's the configuration on your battery ? I've tried a few, but I'm having trouble getting anything in the 10cm x 3.5cm x 1.75cm range.

[Splashx]

I used a small 8.4v 1100mah noname brand like your dimensions, now I only use 9.6v large in the fixed stock nothing less.