Well l96 mag problems

Shrapnel[Op-For] · April 16th, 2008, 21:43

So I recieved my l96 today, along with an extra mag. The extra mags that comes with the gun work well, but the extra one I ordered doesn't seem to fit to good, as in its way to tight. Any one else had that same problem?

Thanks

Shrapnel[Op-For] · April 18th, 2008, 00:13

anyone?

Amos · April 18th, 2008, 00:16

I know maruzen mags are really tight in the well ones,

See where it's tight, and remove material accordingly.

You have to be prepared to modify Chinese clones like this... It's the unfortunate truth.

Muffin · April 19th, 2008, 09:40

i had the same problem with VSR-10 clone. i too have the L96 and i've noticed a super snug fit even with the mag it came with.
Does your extra mag fit in at all?

Muffin · April 19th, 2008, 09:44

Also, this post may be better suited in the 'doctors corner'.

Kos-Mos · April 19th, 2008, 12:22

Look inside the mag well, at the rear. If there is two molded line runnin all the way up, there are the problem. They where added to cope for the lack of tollerence in the China clone.

However, the Well magasin "notch" is made larger than the Maruzen one, so filling the lines won't affect the stock magasine stability.

Shrapnel[Op-For] · April 20th, 2008, 00:13

so file the lines?

Kos-Mos · April 20th, 2008, 00:17

Worked for me.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 16th, 2008, 21:43	#1
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	Well l96 mag problems So I recieved my l96 today, along with an extra mag. The extra mags that comes with the gun work well, but the extra one I ordered doesn't seem to fit to good, as in its way to tight. Any one else had that same problem? Thanks Last edited by Shrapnel[Op-For]; April 17th, 2008 at 01:35..

April 18th, 2008, 00:16	#3
Amos Trader rating Join Date: Aug 2006 Location: Japan	I know maruzen mags are really tight in the well ones, See where it's tight, and remove material accordingly. You have to be prepared to modify Chinese clones like this... It's the unfortunate truth. __________________ Custom Builds: FA3674U Krinkov G3SD6

April 18th, 2008, 00:13	#2
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	anyone?

April 19th, 2008, 09:40	#4
Muffin Trader rating Join Date: Sep 2007 Location: Manitoba	i had the same problem with VSR-10 clone. i too have the L96 and i've noticed a super snug fit even with the mag it came with. Does your extra mag fit in at all?

April 19th, 2008, 09:44	#5
Muffin Trader rating Join Date: Sep 2007 Location: Manitoba	Also, this post may be better suited in the 'doctors corner'.

April 19th, 2008, 12:22	#6
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Look inside the mag well, at the rear. If there is two molded line runnin all the way up, there are the problem. They where added to cope for the lack of tollerence in the China clone. However, the Well magasin "notch" is made larger than the Maruzen one, so filling the lines won't affect the stock magasine stability.

April 20th, 2008, 00:13	#7
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	so file the lines?

April 20th, 2008, 00:17	#8
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Worked for me.

Well l96 mag problems

Airsoft Guns Discussion