Super High cycle gear (pgc 8mm)

[lee1hy]

any idea What parts uesed on this gearbox? its 40 RPS? sounds like a electric saw

YouTube - ProWin 8mm Gear Box

[Kos-Mos]

I would say...

Prowin gearbox
Systema High speed gear
Systema M100-120 (can't be too weak or it will rip the cylinder)
Hand would motor (maybe using some Trinity flat wire)
14.4v battery (LiPo)

[Jayhad]

That's not a PGC 8mm it is the older 7mm version you can tell by the blue anodising. The 8 mms are a grey/bronze colour.

I would use the PGC m80 spring it comes with... I use a M120 and the effecient design of the mech box gives me 21 bps @ 410fps with .20s. I have a magnum motor torque up gear set and a 9.6v battery.

If I was to do a high rate of fire I would use the stock M80 spring, high speed motor, high speed gears and a 10.8 battery. I think if I put a 14.4 lipo up to my gun it would be close to those stats without high speed gears.

the Pro-win can't be compared to regular mech boxs as it is so far ahead.

I will tell you this who ever modded that body to get the mech box to fit is a HACK, pure and simple. there is no reason to grind away the metal body that much.

[Kos-Mos]

hmmm

look at the desk...

The body was probably MADE that way for show-off...
The guy/company what did this is also making at least upper receivers.

*edit*

watch the video... you will get half your answers.

Battery is a GP3300 12v pack.
And they did the 8mm in limited blue.
That video could probably have been made by PGC themself... to demontrate the efficiency and work of their box.

[Jayhad]

I stand corrected on the blue mech box...

I do wonder this how is the stock still attached? on my Pro-win the buffer tube bolt threads into the back of my mech box???

[lee1hy]

Whats Piston and gear? is that 12 teeth piston? or just systema/Promethus?

[ILLusion]

Originally Posted by Jayhad

I stand corrected on the blue mech box...

I do wonder this how is the stock still attached? on my Pro-win the buffer tube bolt threads into the back of my mech box???

Read the manual and see the included images on the CD-ROM... instructions are given to counter-sink the inside of the lower receiver and mount a stove bolt from the INSIDE of the receiver through the buffer tube and attach a nut inside the buffer tube. This allows you to perform a quick-takedown of the entire gun without ever having to remove the rear stock.

[Jayhad]

Originally Posted by lee1hy

Whats Piston and gear? is that 12 teeth piston? or just systema/Promethus?

I just used a systema torque up gear set and a deep fire full metal piston.


Thanks Illusion.... I will look into ataching my stock that way.... I never needed the DVD and I don't recall them showing how to bolt it in together in the instructions but i have been wrong before.

[lee1hy]

Originally Posted by Jayhad

I just used a systema torque up gear set and a deep fire full metal piston.


Thanks Illusion.... I will look into ataching my stock that way.... I never needed the DVD and I don't recall them showing how to bolt it in together in the instructions but i have been wrong before.

Its that movie clip uesed torque up gear? not high-speed type?