G&G M82 Type Flash Suppressor for PSG-1

[sombrio]

Hey first time poster, is there anyway to mod or adapt this flash hider to a TM VSR-10?
Any help would be appreciated, thanks.

[theguy]

wow been here a year and a half and this is your first post?
I'm no expert with that gun, or that flash hider, but they tend to be universal 14mm counter-clockwise threads...
you might need a barrel adaptor, but as i siad, i don't know much about that gun

[sombrio]

thanks for your input, hopefully more pops up

[theguy]

yeah, sorry i can't be of more help, im still learning myself

[sombrio]

anybody else? please

[Elphiel]

Hiho, well first post from me here to

I ordered that Muzzle Break for my Star AW-338 and from what i searched threw the net and from descriptions i can say pretty sure that it does not havy any thread at all. Its just as large that you can put it onto the original Tm PSG-1 outer barrel end and fix it with a little screw at the underside of the Muzzle break. I will get mine at Saturday then i get tell you more like the diameter of it and so on.

-Elphiel

[Drache]

www.redwolfairsoft.com

They have barrel adapters for VSR's so you can mount silencers, just so a search on their website!

[Kos-Mos]

No silencer is needed for that brake.

It goes overthe outerbarrel, and is held in place with a setscrew.

There are big chances that it will fit.

It can either be too loose or too tight.

First case, just wrap some tape on the end of the barrel.

Second case, find a machinist that can bore the hole for you.

[Elphiel]

Alright as said today i got my M82 Style Flash Hider from G&G. Its realy a nice part ant makes every sniper look like a an very evil hitting Rifle. Like said earlier the Flash Hider heas no kind of thread like most silencers have, it is designed just to put it over your outer barrel and fix it with a little hex screw at the side.

It is designed for a Outer Barrel with 21-22mm diameter. So it fits pretty perfectly on my outer barrel extension for my Star AW-338 Flash Hider but scince i damaged my screw of that Flash Hider i cant get it off my Outer Barrel Extender so i have to get me one manufactured. If your Outer Barrel is lager well then you got a Problem because you cant Drill in a larger Hole because at the top and at the botton side the metal is only about 1.5mm thick. So you nee to get an barrel exterder wich you will screw on like a silender adapter or anything else.

You can also use it to hide an longer inner barrel like you would do with a Silencer if the new inner barrel is longer then the outer barrel. You can cover about 3 cm with it but then your holes will be covered by the barrel in the inside.

-Elphiel