|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 13th, 2009, 20:58
|
#1 |
|
AGM H&K 416 Stripped Threads
I stripped the threads on the piece that holds the RIS in place. Now when I use it, the RIS slides around or the piece that just holds on falls off. I thought I would have fixed it by buying a new RIS but it doesn't come with screws. Now I have 2 rails and 1 broken part. Does anyone know where I could buy the screw to hold it on?
|
|
|
|
|
February 13th, 2009, 21:06
|
#2 |
|
Bring the nut part to Home Depot and find a long bolt that will fit. That's what I did.
Also, if you wrap some tape around the barrel nut the RIS will be a tight fit and that bolt will just be a backup.
__________________
JG HK416 KWA USP |
|
|
|
|
|
February 14th, 2009, 12:35
|
#3 |
|
Thank you I will do that
|
|
|
|
|
|
February 14th, 2009, 12:51
|
#4 |
|
you could also try plumbers tape that stuff is great or even locktite.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
