|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 20th, 2009, 12:50
|
#1 |
|
m-6 upgrade
OK I have some queastion 4 y'all
I have swiss arm M-6 s and I want to upgrade the spring to bring up the FPS so my queastion is what kind of spring should I buy if I want it to bring FPS to maybe 410 FPS on .2 bbs second how do i swich the spring??? I did take apart my m-6 to point where only had the tube that contains the spring. However I can't take apart the tube to take out the spring. Can any one help me with this??? thanks
__________________
|
|
|
|
April 20th, 2009, 12:59
|
#2 |
|
To upgrade your FPS you'll need to upgrade your sears, otherwise they'll break and the whole gun will become useless.
I'm not sure what that gun is a clone of.. so I'm not even sure you can upgrade the sears, or the cylinder at all. |
|
|
|
|
April 20th, 2009, 15:08
|
#3 |
|
|
well if you go to http://www.cybergun.com/ and serch item # Item : 280753 that is my rifle.
__________________
|
|
|
|
|
April 20th, 2009, 16:22
|
#4 |
|
I think this is a clone of the UTG M324. It comes with a SEALED cylinder. If you do a google search, you'll find upgrade kits for it, comes with tightbore, new cylinder, hopup unit etc. and should put you in the 400+fps range give or take a few. Check it out !
|
|
|
|
|
April 20th, 2009, 23:26
|
#5 |
|
|
I did some search for upgrade kit and I see that UTG M324 has bit longer berral.
so is it possible to just use cylinder and hopup unit????
__________________
|
|
|
|
|
April 21st, 2009, 00:51
|
#6 |
|
a.k.a. Palucol
|
i have the UTGm324 and I think that the Swissarms m6 is closer to a VSR-10 (short version) then to the UTGm324 ...
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
