Upgrading my echo 1 m16(after losing my kwa m4)

[AngelusNex]

Rewire it. Easiest way to it is to take out all the connector/wires in the M16's box and transfer so that you have a rear wired box, also, through the non ported M16 cylinder in the m16 box.

[Wolf13]

Originally Posted by Sepulcrum

Rewire it. Easiest way to it is to take out all the connector/wires in the M16's box and transfer so that you have a rear wired box, also, through the non ported M16 cylinder in the m16 box.

ok, Will i need to buy anything to do this?

[AngelusNex]

as long as you have the right tiny screw drivers you'll be ok. THOUGH you way want to look into having somebody with a little more experience to do this in case a problem arises. I did this once because my mech box shell broke and needed to dremel the new one so all the parts would fit 100% (not all companies are perfectly compatible) You should be able to find a gun doc in montreal on this forum http://www.quebecairsoft.com/

[Styrak]

Originally Posted by Sepulcrum

through the non ported M16 cylinder in the m16 box.

I don't think routing wires through a mechbox cylinder is a good idea

[Wolf13]

Originally Posted by Sepulcrum

as long as you have the right tiny screw drivers you'll be ok. THOUGH you way want to look into having somebody with a little more experience to do this in case a problem arises. I did this once because my mech box shell broke and needed to dremel the new one so all the parts would fit 100% (not all companies are perfectly compatible) You should be able to find a gun doc in montreal on this forum http://www.quebecairsoft.com/

Ok thank you so much for all the help, i have a friend who can do this because he just did this on his ICS... I just have to wait untill the fire marshal gets all the info on the gun he needs untill we can file the law suit.