Jg sr-25

lechtner03 · March 22nd, 2010, 19:59

Im thinking about getting the JG sr25. does anyone know if i should stay away from it and get the a&k 2r25. is it a good gun?

ujiro · March 22nd, 2010, 20:11

Neither are all that good, and the mags are a pain in the butt to find, and from what I've seen only Hicaps. I am unsure of mag compatibility with the CA or G&G, but I know they won't be compatible with the ARES.

I wouldn't recommend any JG or A&K so I won't recommend these. I would recommend getting the G&G, or the ARES. Both use standard sized V2 gearboxes, so all parts are compatible.

However, none of these are a possibility for you unless you are age verified! So I suggest you fill out your profile (location, etc), and find a rep near you.

Conker · March 22nd, 2010, 20:14

IIRC both are CA clones, so they'd take CA mags.

Best choice hands down is the ARES, and I wouldn't take G&G since their mags and nozzle (maybe other things, I'm not too familiar) are proprietary and quite hard to find.

ujiro · March 22nd, 2010, 20:34

Quote:

Originally Posted by Conker

IIRC both are CA clones, so they'd take CA mags.

Best choice hands down is the ARES, and I wouldn't take G&G since their mags and nozzle (maybe other things, I'm not too familiar) are proprietary and quite hard to find.

They sell em at WGC last I saw. I still have a set of the nozzle and hop up unit sitting around not doing anything... LOL.
But the G&G was a sweet gun.

CA build quality was better. I hated the trades on both of them. Inaccurate/ airsoft company trades annoy me to no end. They ruin the look of the gun.

TokyoSeven · March 22nd, 2010, 20:35

Users IP address registers as American, age verification is not required.

PaCHeKo! · March 22nd, 2010, 21:33

I have an A&K SR-25...

Here's the mags that I use : http://shop.ehobbyasia.com/gandp-sr2...-sr25-aeg.html

I can't say anything about stock performance since it was a "project" gun, I started to upgrade it just after I had it in my possession. By the way, the A&K uses the same "long" gearbox as the Classic Army. Finding upgrades wasn't hard at all.

I prefer no trades than some BS trades that comes with the Classic Army.

The entire gun (except the stock) is full metal. Feels very solid.

One thing I don't like about the A&K is the full-auto feature.

Mr. G36! · March 22nd, 2010, 21:43

...JG makes an SR-25? I need to investigate...

lechtner03 · March 22nd, 2010, 21:48

i looked at the ares and g&g but i don't have enough money to buy them.

would this be worth the money or a waste.

http://www.airsoftmegastore.com/Prod...shoppingengine

Mr. G36- yeah i just heard about it too. its right here. the second link is a youtube review

http://www.airsoftmegastore.com/Prod...shoppingengine

YouTube- AirSplat ON DEMAND: A&K & JG SR-25 Airsoft Electric Gun Rifle Reviews Episode 23

thpethalK · March 22nd, 2010, 21:49

Don't mean to threadjack but nice fucking paintjob pacheko....how did you do that?

Mr. G36! · March 22nd, 2010, 22:02

Quote:

Originally Posted by lechtner03

Mr. G36- yeah i just heard about it too. its right here. the second link is a youtube review

Aww, it's a baby!? Seriously, the SR-25 needs to be AT LEAST as long as I am tall for it to look any good. Okay, maybe not 6'2", but the longer the better.

kalnaren · March 22nd, 2010, 22:22

Quote:

Originally Posted by Conker

IIRC both are CA clones, so they'd take CA mags.

Well.. just because it's a clone doesn't mean it will take the mags. I had a G&G L85 clone that wouldn't even fucking feed with it's own mag, never mind any other magazines.

lechtner03 · March 23rd, 2010, 22:14

i looked at the ares and g&g but i don't have enough money to buy them.

would this be worth the money or a waste.

http://www.airsoftmegastore.com/Prod...shoppingengine

kalnaren · March 23rd, 2010, 22:25

A&K usually isn't terrible... certainly nowhere near CA or G&P quality though.

In airsoft you get what you pay for. It's one thing where a more expensive item 99% of the time is, in fact, higher quality.

ujiro · March 23rd, 2010, 22:28

I wouldn't piss $250USD on an A&K SR25 even if that was the price being offered to me in Canada.

You said you checked the G&G and ARES... Did you check the G&G? Its pretty decent. And with a few upgrades or a new drop in box can be an absolute Machine.

lechtner03 · March 23rd, 2010, 22:38

yeah i checked the G&G. i like it alot, but its $405 us without any upgrades and i cant spend over $300 on a gun. I was interested in the A&k because the website says that it has been upgraded already
even the jg sounds like a good deal. do you know what gearbox it uses?
http://www.airsoftmegastore.com/Prod...shoppingengine

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 22nd, 2010, 19:59	#1
lechtner03 Trader rating Join Date: Mar 2010 Location: pa, us	Jg sr-25 Im thinking about getting the JG sr25. does anyone know if i should stay away from it and get the a&k 2r25. is it a good gun?

March 22nd, 2010, 20:11	#2
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	Neither are all that good, and the mags are a pain in the butt to find, and from what I've seen only Hicaps. I am unsure of mag compatibility with the CA or G&G, but I know they won't be compatible with the ARES. I wouldn't recommend any JG or A&K so I won't recommend these. I would recommend getting the G&G, or the ARES. Both use standard sized V2 gearboxes, so all parts are compatible. However, none of these are a possibility for you unless you are age verified! So I suggest you fill out your profile (location, etc), and find a rep near you. __________________ I love freedom and consequently America

March 22nd, 2010, 20:14	#3
Conker Trader rating Join Date: Jan 2007 Location: Canada / Ireland / USA	IIRC both are CA clones, so they'd take CA mags. Best choice hands down is the ARES, and I wouldn't take G&G since their mags and nozzle (maybe other things, I'm not too familiar) are proprietary and quite hard to find. __________________ WTS: King Arms/Madbull Mk18 Mod1 - VFC Mk17 SCAR-H midcap mags, FDE - VFC Mk17 SCAR-H + PWS rail, FDE WTB/WTT: CSOR gear, BFG, Tyr, Crye, etc

March 22nd, 2010, 20:35	#5
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Users IP address registers as American, age verification is not required. __________________ "Its only a little bit on fire"

March 22nd, 2010, 21:33	#6
PaCHeKo! Trader rating Join Date: Jan 2008 Location: St-Jérôme, Québec	I have an A&K SR-25... Here's the mags that I use : http://shop.ehobbyasia.com/gandp-sr2...-sr25-aeg.html I can't say anything about stock performance since it was a "project" gun, I started to upgrade it just after I had it in my possession. By the way, the A&K uses the same "long" gearbox as the Classic Army. Finding upgrades wasn't hard at all. I prefer no trades than some BS trades that comes with the Classic Army. The entire gun (except the stock) is full metal. Feels very solid. One thing I don't like about the A&K is the full-auto feature. __________________ P.M.C. - Prostituée Militaire de Campagne.

March 22nd, 2010, 21:43	#7
Mr. G36! Trader rating Join Date: Jul 2007 Location: Beautiful Thunder Bay, where dreams become nightmares!	...JG makes an SR-25? I need to investigate... __________________ Airsoft It's all fun and games until someone gets hurt...and then it becomes sport!

March 22nd, 2010, 21:48	#8
lechtner03 Trader rating Join Date: Mar 2010 Location: pa, us	i looked at the ares and g&g but i don't have enough money to buy them. would this be worth the money or a waste. http://www.airsoftmegastore.com/Prod...shoppingengine Mr. G36- yeah i just heard about it too. its right here. the second link is a youtube review http://www.airsoftmegastore.com/Prod...shoppingengine YouTube- AirSplat ON DEMAND: A&K & JG SR-25 Airsoft Electric Gun Rifle Reviews Episode 23 Last edited by lechtner03; March 22nd, 2010 at 21:53..

March 23rd, 2010, 22:14	#12
lechtner03 Trader rating Join Date: Mar 2010 Location: pa, us	i looked at the ares and g&g but i don't have enough money to buy them. would this be worth the money or a waste. http://www.airsoftmegastore.com/Prod...shoppingengine

March 23rd, 2010, 22:28	#14
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	I wouldn't piss $250USD on an A&K SR25 even if that was the price being offered to me in Canada. You said you checked the G&G and ARES... Did you check the G&G? Its pretty decent. And with a few upgrades or a new drop in box can be an absolute Machine. __________________ I love freedom and consequently America

March 23rd, 2010, 22:38	#15
lechtner03 Trader rating Join Date: Mar 2010 Location: pa, us	yeah i checked the G&G. i like it alot, but its $405 us without any upgrades and i cant spend over $300 on a gun. I was interested in the A&k because the website says that it has been upgraded already even the jg sounds like a good deal. do you know what gearbox it uses? http://www.airsoftmegastore.com/Prod...shoppingengine

Jg sr-25

Airsoft Guns Discussion