|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 13th, 2010, 12:57
|
#1 |
|
Perroz Designs
|
ProWin M4 GBBR Mags & Ranger Plates
Hi there.
I am having some trouble removing the bottom mag plate on my ProWin M4 GBBR mags. I push down the little black "button" and try to slip the plate forward, but nothing moves. I have pushed really hard and still nothing. Can someone please help me get these bottom plates off so I can install my USGI Magpul ranger plates please  Thanks, much appreciated
__________________
 
|
|
|
|
April 13th, 2010, 13:08
|
#2 |
|
likes touching tralalas
|
like you said, push the little black pin, then lift the lip a little bit(with a flat screw driver) and slide, it should work.
Mine slides like that :P
__________________
EF-02 SEMPER FI
 |
|
|
|
|
April 13th, 2010, 16:13
|
#3 |
|
Perroz Designs
|
As mentioned, you have to push the black-circle-buttom and lift/pull the plate with some force.
I was able to remove all the plates on my ProWins. If you want to install Magpul USGI Ranger Plates, you have more mods to do  I sanded the sides and wings off of the plastic plate lock and round the front corners to make it fit. Then I also sanded a bit of rubber off of the bottom of the rubber ranger-pull. Its a tough fit, but it works. If anyone needs any help/tips on the Magpul USGI Ranger Plates , feel free to PM me or post here.
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
