|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 6th, 2010, 03:02 | #1 |
need a reliable drum mag & what parts to get for a ak 105 ?
have a ak 105
Im looking for a reliable drum mag, whats a good brand ? |
|
May 6th, 2010, 03:30 | #2 |
afaik there's no drum mags in airsoft that was replcating 5.45 type as for 7.62 just redwolf it, Most of their drum mag stuff is pretty good. One thing I'll say is that drum mags are waste of money both the drum and the bb used. In addition most games dont allow it simply it promote spray n pray paintball.
|
|
May 6th, 2010, 03:48 | #3 |
Official ASC "Dumb Ass"
|
lol noobs and drum mags
AK104 shoots 7.62 and looks the same hehe
__________________
|
May 6th, 2010, 04:11 | #4 |
May 6th, 2010, 04:17 | #5 |
what parts to get ?
i have a ak 105
im just getting confused about what is compatible with what gun. when i want to upgrade my gun do i look for ak 74 parts or ak 47 parts? |
|
May 6th, 2010, 04:21 | #6 |
i have had a few drum mags in my time (i'll admit to it) but nothing is as reliable as i want..
sure, some will give you a few bursts, but the only one i ever managed to get near-decent (note: not 'good') performance required alot of tinkering.. i gave up, and unless you intend on using it for an RPK build, i would advise you too.. |
|
May 6th, 2010, 04:45 | #7 | |
Just roll with a bunch of midcaps.
Effectively 100% reliability in 150 round packages.
__________________
-Cheese Quote:
|
||
May 6th, 2010, 04:49 | #8 |
Crackers
|
Ran a Dboys C-mag started with 3 AAA batteries and well didn't come close to keeping up with my gun, so I swapped it with a 9V and came close but still had the 2-3 second pauses where the mag tried to keep up with the gun.
|
May 7th, 2010, 04:09 | #9 |
Easy now kids...
Tycoon, what exactly are you wanting to upgrade on your ak? Gear box, barrel, hop-up, motor, etc. Like pusangani said, the more info you give on what you want to do, the better we can help you.
__________________
|
|
May 7th, 2010, 04:12 | #10 | |
A-56 aka Mr.Hitman
|
Quote:
All you have to know is V3 AK parts take V3 AK parts. Get Age Verified to find more parts on classifieds. What do you even need to upgrade on it? If you're 21, get Age Verified. There's an event happening Friday (Today) at TTAC. Get verified there. |
|
May 7th, 2010, 04:12 | #11 |
Official ASC "Dumb Ass"
|
What is your question exactly?
All you keep saying is "I have an ak105 what is compatible with it" I dunno 6mm bb's are compatible with it ak magazines are compatible with it silicone oil is compatible with it an ak sling is compatible with it it has a v3 gearbox so most tm compatible internals would be compatible but again all you say is "what is compatible" if you don't show that you have at least tried to help yourself then people are not going to help you making 4 threads all relating to the same subject is just spamming and shows that you are impatient as well as lazy
__________________
|
May 7th, 2010, 04:18 | #12 |
Red Wine & Adderall
|
Threads merged and cleaned.
Tycoon please refrain from creating multiple threads on the same topic.
__________________
"Its only a little bit on fire" |
May 7th, 2010, 04:22 | #13 |
ok i apologize for the lack of information
well i took apart my gear box and decided to get metal bushings, new nozzel (mine is clear plastic), and metal spring guide also my gun is shooting high, this is even after i adjusted my hop up. I dont know if it is my barrel or hop up. also i want to run a 9.6v should i get a new motor ? |
|
May 7th, 2010, 04:24 | #14 |
May 7th, 2010, 04:26 | #15 |
Red Wine & Adderall
|
I dont think you need a new motor to run that battery.
Can you think of any specific logical reason as to why you would need a new motor? Quality bushings, a good shim job and a sturdy bearing spring guide are generally all people need for the most part.
__________________
"Its only a little bit on fire" |
|
Bookmarks |
|
|