MP5 upgrades

brandedman · May 10th, 2010, 17:46

Hey guys, just wanted to know what upgrades you have done to your MP5's for rails, optics etc. I just got mine lol, yeah it's my first AEG *hangs newbish head* and wanted some advice on what has worked well for you and what hasn't.

/Thanks

coach · May 10th, 2010, 17:52

Which mp5 do you have? Mines gone from a standard cheap UTG A5 to custom metal frankenMP5 with completely new internals as well as new upper/lower and front end. Basically is a CA/TM/custom bastard child.

TechSeller · May 10th, 2010, 18:01

I have a pretty modest Top Tech Blow Back model. My first as well

So far I have upgraded the battery (went with the nunchuk style so it fits better in the handgrip), added a scope mount and Leapers 1x40 Red/Green Dot (http://bestairsoftguns.wordpress.com/2008/03/30/ ...not bad if you don't want to blow your brains out on optics) and a G&G vertical foregrip.

Happy with all of it. Still a few other minor upgrades planned but more likely it will be replaced in the near future.

Good luck!

brandedman · May 10th, 2010, 21:48

I've got a fully stock G&G mp5 A5 with blowback. so far I've ordered a hand guard with rails and a vertical foregrip, and i'm not sure what to go with for any kind of optics

brandedman · May 12th, 2010, 03:47

no help here?

Tryptic · October 20th, 2010, 19:31

Quote:

Originally Posted by brandedman

I've got a fully stock G&G mp5 A5 with blowback. so far I've ordered a hand guard with rails and a vertical foregrip, and i'm not sure what to go with for any kind of optics

I just got the G&G MP5A4 Max, Where did you get your foregrip?

mroneto · October 21st, 2010, 04:21

I like the look of EoTech HWS on MP5's..look somewhat more natural on M4's though :s

Able1 · October 21st, 2010, 10:08

look for something low profile, There is a red dot sight out there for the mp5 but a T-1 would do the job.

5.56 · October 21st, 2010, 11:33

If you decide to go for an EOTECH for optic, make sure your scope mount has atleast 4.5 inches of uninterrupted rails so it can mount properly.

BABU · October 21st, 2010, 13:53

G&G mp5 a4

so far just got eotech replica for sights, i like it a lot, but then again i havent used anything else as this is my 1st gun as well

eventually gonna get rails for front end, and then probably vertical grip and a flashlight with pressure switch

cant think of anything else usefull to put on that you would actually need/use

other than that plenty of things you can do to it internally

ive put in a metal cylinder head and a new modify piston head (as G&G is well known to have poorly sealing piston heads) if you do any upgrades the piston head should probably be the first thing you replace
shimmed and cleaned/regreased the mechbox
soldered on deans connectors

and for future gonna get a tight bore barrell longer than my stock one, cover it with a silencer on the gun, and replace more in the mechbox with some better prometheus parts

Daiviet · October 21st, 2010, 14:35

Quote:

Originally Posted by Tryptic

I just got the G&G MP5A4 Max, Where did you get your foregrip?

you already started a thread about this. Use your brain. Google is your friend. Way to bump a thread with a useless question.

coach · October 21st, 2010, 14:57

Mine has now reverted from the custom MP5SD2 to a true MP5A4 with 3 round burst.

The ASCU and Intellect 9.9v LIFE and brought this baby back to life! She a little loud but shoots like a laser. lol

Schwag · October 21st, 2010, 15:16

http://www.airsoftcanada.com/showthread.php?t=107449

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 10th, 2010, 17:46	#1
brandedman Trader rating Join Date: Apr 2010 Location: Medicine Hat, AB	MP5 upgrades Hey guys, just wanted to know what upgrades you have done to your MP5's for rails, optics etc. I just got mine lol, yeah it's my first AEG hangs newbish head and wanted some advice on what has worked well for you and what hasn't. /Thanks

May 10th, 2010, 17:52	#2
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	MP5 upgrades Which mp5 do you have? Mines gone from a standard cheap UTG A5 to custom metal frankenMP5 with completely new internals as well as new upper/lower and front end. Basically is a CA/TM/custom bastard child. Last edited by coach; May 10th, 2010 at 17:56..

May 10th, 2010, 18:01	#3
TechSeller Trader rating Join Date: Jan 2010 Location: Toronto	I have a pretty modest Top Tech Blow Back model. My first as well So far I have upgraded the battery (went with the nunchuk style so it fits better in the handgrip), added a scope mount and Leapers 1x40 Red/Green Dot (http://bestairsoftguns.wordpress.com/2008/03/30/ ...not bad if you don't want to blow your brains out on optics) and a G&G vertical foregrip. Happy with all of it. Still a few other minor upgrades planned but more likely it will be replaced in the near future. Good luck! __________________ North Trail Sports - Mora, Motorola, Puxing, Fogtech & More! / Our ASC Retail Thread

May 10th, 2010, 21:48	#4
brandedman Trader rating Join Date: Apr 2010 Location: Medicine Hat, AB	I've got a fully stock G&G mp5 A5 with blowback. so far I've ordered a hand guard with rails and a vertical foregrip, and i'm not sure what to go with for any kind of optics Last edited by brandedman; May 12th, 2010 at 03:47..

May 12th, 2010, 03:47	#5
brandedman Trader rating Join Date: Apr 2010 Location: Medicine Hat, AB	no help here?

October 21st, 2010, 04:21	#7
mroneto Trader rating Join Date: Sep 2009 Location: B.C.	I like the look of EoTech HWS on MP5's..look somewhat more natural on M4's though :s

October 21st, 2010, 10:08	#8
Able1 Joeyaglr444 Trader rating Join Date: Mar 2006 Location: Toronto Ontario	look for something low profile, There is a red dot sight out there for the mp5 but a T-1 would do the job. __________________ It's not about the guy who doesn't call his hit. It's about the pants you're wearing and the pants you're team mate is wearing, Is it real multi cam or is it Chinese repro multi cam? I don't know but in the end it's still multicam.

October 21st, 2010, 11:33	#9
5.56 Trader rating Join Date: May 2007 Location: Burnaby	If you decide to go for an EOTECH for optic, make sure your scope mount has atleast 4.5 inches of uninterrupted rails so it can mount properly.

October 21st, 2010, 13:53	#10
BABU Trader rating Join Date: Apr 2008 Location: Kitchener, Ontario	G&G mp5 a4 so far just got eotech replica for sights, i like it a lot, but then again i havent used anything else as this is my 1st gun as well eventually gonna get rails for front end, and then probably vertical grip and a flashlight with pressure switch cant think of anything else usefull to put on that you would actually need/use other than that plenty of things you can do to it internally ive put in a metal cylinder head and a new modify piston head (as G&G is well known to have poorly sealing piston heads) if you do any upgrades the piston head should probably be the first thing you replace shimmed and cleaned/regreased the mechbox soldered on deans connectors and for future gonna get a tight bore barrell longer than my stock one, cover it with a silencer on the gun, and replace more in the mechbox with some better prometheus parts

October 21st, 2010, 14:57	#12
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	Mine has now reverted from the custom MP5SD2 to a true MP5A4 with 3 round burst. The ASCU and Intellect 9.9v LIFE and brought this baby back to life! She a little loud but shoots like a laser. lol

October 21st, 2010, 15:16	#13
Schwag Trader rating Join Date: Sep 2006 Location: A sick fascist corporatocracy.	http://www.airsoftcanada.com/showthread.php?t=107449 __________________ (Former)Grand Poobah of T.W.A.T.

MP5 upgrades

Upgrades & Modifications