Ak Stock adapter wiring

Spike · July 10th, 2010, 23:06

Hey, I was wondering if anyone knew if you can feed wires through a King Arms AK to M4 stock adapter? I'd want to run a crane stock with a battery because I don't want to have to get another type of battery (ie stick) since I have 3 crane stock batteries already.

Brayden · July 10th, 2010, 23:24

http://shop.ehobbyasia.com/king-arms...-m4-stock.html
says yes.

jamuke · July 11th, 2010, 00:31

there is a small hole to run the wires through to the stock but you'll have to remove and resolder the battery connector

also this adaptor won't work with tang type ak receivers

Spike · July 11th, 2010, 01:15

Soldering isn't a problem, I always switch to deans anyway. What do you mean by tang type? Is that with the metal flanges on the side or the top?

Spike · July 12th, 2010, 02:47

I'm guessing that the adapter is compatible with stocks that attach at the top and bottom, anyone care to confirm?

Rooster · July 12th, 2010, 02:55

I can't see how that would work Spike. I'm guessing you want to go from a fixed stock on the AK to the Crane?

I don't see anywhere on there that would fit into the AK reciever or anywhere that you could get the top or bottom bars from the original stock plate to attach to the adapter.

I'm not positive though. Send Ash a PM on AAS and see if he can help. He has a Crane on his.

Spike · July 12th, 2010, 03:02

Oh yeah, I forgot about that, thanks!

Rooster · July 12th, 2010, 03:21

Check this one out, and you can see the front end where it slides into the reciever.. so it replaces the original stock plate.

http://shop.ehobbyasia.com/king-arms...live-drab.html

the other adapter is a bad angle photo.. It's hard to tell how it attaches..but it might be the same..

Spike · July 12th, 2010, 13:21

His was a one piece body kit, so now I'm back to not knowing

Spike · July 12th, 2010, 14:43

Found this http://www.digitalwastelands.com/con...=241&Itemid=40

Rooster · July 14th, 2010, 00:56

Nice find. That makes it alot more clear how it works. I'd now say go for it. What Ak do you plan to put this on?

Seems pretty straight forward.

Spike · July 14th, 2010, 01:05

I think I'll be getting one of Subman's cheaper AKs...I can get an Element body for it if it's not the right kind of stock tabs. It's actually going to be for a conversion :O

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 10th, 2010, 23:06	#1
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Ak Stock adapter wiring Hey, I was wondering if anyone knew if you can feed wires through a King Arms AK to M4 stock adapter? I'd want to run a crane stock with a battery because I don't want to have to get another type of battery (ie stick) since I have 3 crane stock batteries already. __________________ I change primaries like other people change socks.

July 10th, 2010, 23:24	#2
Brayden ¡¡¡ɹǝʞɐǝɹq oqɯoɔ-ɔ-ɔ-ɔ Trader rating Join Date: Sep 2009 Location: Sault Ste Marie	http://shop.ehobbyasia.com/king-arms...-m4-stock.html says yes. __________________ Primary: TM MK 17 MOD 0, ICS L85 A2, Echo1 AKM, Echo1 AK-74, WE AK-74UN, JG AK-47 \| Secondary: TM M9 Proud member of Force Recon

July 11th, 2010, 00:31	#3
jamuke Trader rating Join Date: Dec 2008 Location: Trono	there is a small hole to run the wires through to the stock but you'll have to remove and resolder the battery connector also this adaptor won't work with tang type ak receivers __________________

July 11th, 2010, 01:15	#4
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Soldering isn't a problem, I always switch to deans anyway. What do you mean by tang type? Is that with the metal flanges on the side or the top? __________________ I change primaries like other people change socks.

July 12th, 2010, 02:47	#5
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	I'm guessing that the adapter is compatible with stocks that attach at the top and bottom, anyone care to confirm? __________________ I change primaries like other people change socks.

July 12th, 2010, 02:55	#6
Rooster a.k.a. flamethis Trader rating Join Date: Mar 2010 Location: New Brunswick	I can't see how that would work Spike. I'm guessing you want to go from a fixed stock on the AK to the Crane? I don't see anywhere on there that would fit into the AK reciever or anywhere that you could get the top or bottom bars from the original stock plate to attach to the adapter. I'm not positive though. Send Ash a PM on AAS and see if he can help. He has a Crane on his.

July 12th, 2010, 03:02	#7
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Oh yeah, I forgot about that, thanks! __________________ I change primaries like other people change socks.

July 12th, 2010, 03:21	#8
Rooster a.k.a. flamethis Trader rating Join Date: Mar 2010 Location: New Brunswick	Check this one out, and you can see the front end where it slides into the reciever.. so it replaces the original stock plate. http://shop.ehobbyasia.com/king-arms...live-drab.html the other adapter is a bad angle photo.. It's hard to tell how it attaches..but it might be the same..

July 12th, 2010, 13:21	#9
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	His was a one piece body kit, so now I'm back to not knowing __________________ I change primaries like other people change socks.

July 12th, 2010, 14:43	#10
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Found this http://www.digitalwastelands.com/con...=241&Itemid=40 __________________ I change primaries like other people change socks.

July 14th, 2010, 00:56	#11
Rooster a.k.a. flamethis Trader rating Join Date: Mar 2010 Location: New Brunswick	Nice find. That makes it alot more clear how it works. I'd now say go for it. What Ak do you plan to put this on? Seems pretty straight forward.

July 14th, 2010, 01:05	#12
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	I think I'll be getting one of Subman's cheaper AKs...I can get an Element body for it if it's not the right kind of stock tabs. It's actually going to be for a conversion :O __________________ I change primaries like other people change socks.

Ak Stock adapter wiring

Upgrades & Modifications