|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 19th, 2010, 02:09
|
#1 |
|
M.Garcia
M.Garcia M.Garcia 
|
ICS M4 - Stock Removal
I got the adjustable stock and I'm trying to figure out how to remove it. I'm browsing the net but can't seem to find the answer.
|
|
|
|
July 19th, 2010, 03:02
|
#2 |
|
Take a pair of plyer and pull this knob downward:
 At the same time pull the stock back off the buffer tube. Then at the end of the buffer tube there a cap with a screw at the bottom; unscrew it and remove the cap. Remove the screw inside the buffer tube with a Phillips screwdriver and pull the buffer tube off.
__________________
HellRanger 1969-2007 LRRP FOREVER  101e 506Pir Fox Company - SHTYK NOZH |
|
|
|
|
July 19th, 2010, 04:30
|
#3 |
|
M.Garcia
M.Garcia M.Garcia
|
Aight thanks!
|
|
|
|
|
July 19th, 2010, 04:48
|
#4 |
|
Even without using pliers, at the very end of the adjusting-bracket (I don't exactly know the correct term) facing the rear of the stock itself where the bracket ends, if instead of pulling it up as you would to adjust it, pull it down, which should pull the knob/pin down, and you can slide the stock right off.
I use that way to remove my crane stock, it should work on your stock as well. -Cab |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
