Prometheus galore- PROJECT COMPLETE (Sept 11, 2010)

[turok_t]

I got my packages this morning and was bored, so decided to take pics of all the Prometheus upgrades that I got in the mail this morning. Cost me a fortune, but hope its worth it. Also included is a guarder clear hop up, and a G&P trigger assembly. There are 2 inner barrels in total, Prometheus 6.03mm 363mm and KM 6.04mm 469mm inner barrels. I will be giving my gearbox a nice upgrade with everything below.

[Donster]

if you could do some scientific tests to compare the two inner barrels, and post it up, that would be greatly appreciated!

i.e. shot groupings at 10, 20, 30 feet etc etc.

[Thenooblord]

that is impossible as the barrels are different manufacturers, bore, AND length

[turok_t]

Originally Posted by Donster

if you could do some scientific tests to compare the two inner barrels, and post it up, that would be greatly appreciated!

i.e. shot groupings at 10, 20, 30 feet etc etc.

Sure, I can give some results between the 2 barrels even though they are different lengths, size and from different manufacturers.

[apparition]

Originally Posted by Thenooblord

that is impossible as the barrels are different manufacturers, bore, AND length

how is that impossible? you put the data side by side and see what the differences are.... as much as there is those variables that will make them different still would be good to see the real difference b/w length of your barrel.
never know when there might be some odd data, ie the shorter one shot better(i know it doesnt work like that but you never know)

[Amos]

Only problem I see here is the Piston Head and Cylinder head aren't the ARS MASK kit

[Donster]

Originally Posted by Thenooblord

that is impossible as the barrels are different manufacturers, bore, AND length

length is a bit of an issue, but bore isn't. that is half the reason why i want tests done.

still, they can be compared to some degree.

[Kos-Mos]

Originally Posted by Amos

Only problem I see here is the Piston Head and Cylinder head aren't the ARS MASK kit

2 years ago there was no MASK kits and the Promy parts where the best there was around.

I have yet to install a MASK kit and probably will never, it all depends on what you are looking for... ultra silent piston head means all you hear it the whining of the motor....

[Styrak]

Do you even game your guns?

What's the point of emptying your bank account on Prom parts?

[turok_t]

Originally Posted by Amos

Only problem I see here is the Piston Head and Cylinder head aren't the ARS MASK kit

ARS MASK kit? wats that?

Originally Posted by Styrak

Do you even game your guns?

What's the point of emptying your bank account on Prom parts?

Why would u assume i dont game my guns right off the batt? For your information, I do game my guns, just not in Saskatoon where u live.

[Amos]

Originally Posted by turok_t

ARS MASK kit? wats that?

Originally Posted by Kos-Mos

2 years ago there was no MASK kits and the Promy parts where the best there was around.

I have yet to install a MASK kit and probably will never, it all depends on what you are looking for... ultra silent piston head means all you hear it the whining of the motor....

You're missing out then

[turok_t]

Amos, i heard that ure a big Prometheus fan boy.. how does the ARS MASK kit compare with the one from prometheus?

[Amos]

Prometheus makes great parts, But the only piston and cylinder heads I'll ever use are ARS

They provide 100% perfect air-seal and the integral sorbothane makes them greatly reduce the muzzle noise when you're shooting at someone.

[turok_t]

Originally Posted by Amos

Prometheus makes great parts, But the only piston and cylinder heads I'll ever use are ARS

They provide 100% perfect air-seal and the integral sorbothane makes them greatly reduce the muzzle noise when you're shooting at someone.

How much of an improvement do u usually get with the ARS MASK kit?

[Amos]

Improvement in what?

In air seal... over stock... it's a drastic change..
But over air seal with Prometheus parts? Wont be much of a change there..

It quiets it down significantly... I don't have an accurate way of measuring... but next time I install one I'll take a before and after shot and record the noise to see roughly what kind of dB reduction there is.