|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 25th, 2010, 19:52
|
#1 |
|
Laylax PSS10 Hopup Chamber
Hey guys. I am going to swap to the Laylax PSS10 Hopup Chamber and was wondering if anyone has had experience with them. Does it come complete or will I have to take any internals out of my stock TSD hopup. The stock one in this clone is garbage and broke quickly. Also if anyone has any install guides on one or any good pictures I've looked but found no info on them only that people have put them in. I would be thankful. I have seen pics of it on websites but nothing up close or apart. Just want to know also if they work well? Thanks in advance.
__________________
-TM AK Beta Spetz -TM MP5 SD5 -TSD VSR10 -Ares G39C -A&K Tan Magpul Masad -We Tech M9 Tac Masterling -1Tornado Impacts V2/3 Gun Doc and BA experience |
|
|
|
July 25th, 2010, 19:55
|
#2 |
|
|
I also know that I have to us a AEG barrell. I've built a pretty cool silencer for my gun and put the CW adapter on the end of my outer barrell. I want to find a 600mm 6.01 or 6.02 tight bore for my sniper setup.
__________________
-TM AK Beta Spetz -TM MP5 SD5 -TSD VSR10 -Ares G39C -A&K Tan Magpul Masad -We Tech M9 Tac Masterling -1Tornado Impacts V2/3 Gun Doc and BA experience |
|
|
|
|
July 25th, 2010, 20:04
|
#3 | |
|
You need an AEG barrel and hop-up rubber.
You also need to install a full bore-up kit if you want to use a 600mm barrel. That usually runs for about 500$ for the kit alone.
__________________
Quote:
|
|
|
|
|
|
July 25th, 2010, 20:54
|
#4 |
|
Kos-Mos speaks the truth!
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
