M14 DMR with 11.1 v lipo

Long_Bong · February 28th, 2011, 17:14

Hi,

I m planning on modyfying a G&P M14 DMR to shoot semi only (Mosfet) at 450 fps with a 11.1 lipo.

Anyone had experience with high voltage lipo / mosfet / high fps / semi only combo?

Thanks

Whiskey · February 28th, 2011, 19:19

It should have a wicked trigger response, just have good trigger discipline as a 450fps "double tap" hurts like a bitch lol. What is the C value of the LiPo battery you're using?

Long_Bong · February 28th, 2011, 19:35

I ll lock it semi with a 2 or 3 sec delay in between

not sure which lipo to go for, sugestion?

stubs · February 28th, 2011, 20:02

i have ran all 3 of my m14's with both a 7.2v lipo and an 11.1 didn't notice much difference on semi auto but provide amazing trigger response mosfet is a good idea will save you money in the end arcing across the switch can be excessive with the lipos. non of my have a mosfet but will be upgrading to them shortly and i have gun ranging from 380-470 in my m14s lipo is the way to go.

phloudernow · February 28th, 2011, 22:29

Suggestion would be a King Arms 11.1v 15C lipo, most lipos you should use are around 15C anything above 20C will kill your switch in no time those lipos above 20c are more for RC car racing

Sportco · February 28th, 2011, 22:38

Si tu veux seulement tirer semi, je ne vois pas quelle avantage tu va avoir Ã* utiliser une 11.1v...

Le coup de bÃ©lier sur le systÃ¨me va Ãªtre brutal avec une 11.1v et tu ne dÃ©sire tirer que une ou 2 seconde aprÃ¨s!!! donc l'avantage vitesse de rotation (ROF) que te donne la LIPO 11.1v ne s'applique pas Ã* toi...

Corrige moi si je me trompe mais tu serais pas mieux avec une 7.2v sur ton kit MOSFET?

Cheers

Long_Bong · February 28th, 2011, 23:01

It for quick trigger response and short noise signature

The DMR is for a left handed girl you know well that want to snipe

Sportco · February 28th, 2011, 23:06

Quote:

Originally Posted by Long_Bong

It for quick trigger response and short noise signature

The DMR is for a left handed girl you know well that want to snipe

Man... First the Mk 23 now this...

... Captain Kirk... PAIN

Make sense... cycle will be shorter (If the gearbox doesnt crap)

Cheers

Long_Bong · February 28th, 2011, 23:07

G&P pumped to 450, all else (except spring and trigger master mosfett will be stock)

And Gemtech silencer just for you Sportco

Themis · February 28th, 2011, 23:12

Quote:

Originally Posted by Long_Bong

The DMR is for a left handed girl you know well that want to snipe

awwwww

That's me!!

Sportco · February 28th, 2011, 23:13

Quote:

Originally Posted by Long_Bong

G&P pumped to 450, all else (except spring and trigger master mosfett will be stock)

And Gemtech silencer just for you Sportco

Yeah ... no shit... When she's arround I ALWAYS end up on the receiving end of those monsters you create for her... yes me worried

Whiskey · February 28th, 2011, 23:50

Quote:

Originally Posted by Long_Bong

I ll lock it semi with a 2 or 3 sec delay in between

not sure which lipo to go for, sugestion?

I would suggest one of the new Kypom Lipos in a 11.1v 2200 mah 30c continuous 60c burst. I am currently using a 7.4v version in my MP5 and its a very nice high quality unit, affordable too (only $22.99 through a supplier in Winnipeg).

Quote:

Originally Posted by phloudernow

Suggestion would be a King Arms 11.1v 15C lipo, most lipos you should use are around 15C anything above 20C will kill your switch in no time those lipos above 20c are more for RC car racing

I would recommend against this unit as it is low in quality and you could do much better for the money. Anything above 20c will kill his switch??? I'm sorry but what exactly are you talking about???. I'm sure the FET he is using is of higher quality (programmable) ( almost all high end FET's can handle 40amp continuous minimum and most setups will never draw that anyways). Just because a battery has available amperage ("c" value x capacity / 1000 = total amperage available ) to draw from, does not mean it forces the AEG to use it or over supplies it. An AEG will only draw whatever amperage it requires to run at it's optimum speed. Example, you have setup with high speed gears and 1J spring that requires 25amps to run at it's optimum speed, you run this set up on an 11.1v lipo with 5000mah capacity with a 60c discharge rate, that is 300amps you have to draw on with that battery, still you're set up will only draw 25 amps because that's the full load it requires to run at it's optimum speed.I'm sorry but I would recommend to go with the highest "c" value and Mah you can afford in a battery.

liquidgenesis · March 1st, 2011, 15:46

Quote:

Originally Posted by BLACKWATER204

Just because a battery has available amperage ("c" value x capacity / 1000 = total amperage available ) to draw from, does not mean it forces the AEG to use it or over supplies it. An AEG will only draw whatever amperage it requires to run at it's optimum speed.

quoted for truth. thank you for dispelling more myths about lipos.
:salute:

Whiskey · March 1st, 2011, 21:11

Quote:

Originally Posted by liquidgenesis

quoted for truth. thank you for dispelling more myths about lipos.
:salute:

Always there to help and defend the mighty lipo

.

enemybrit · March 10th, 2011, 08:46

I am personally using an echo 1 m14 with a guarder sp120 tune up kit, m140 spring, element high torque motor, systema rubber scs and Prometheus ash barrel. I also use a passive breaking mosfet (homade, 1000000000x better than an AB). I am shooting 470 fps with .2g bbs +-2 fps. With .3g bbs I am hitting people out at 170 feet.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 28th, 2011, 17:14	#1
Long_Bong Trader rating Join Date: Dec 2007 Location: Canada	M14 DMR with 11.1 v lipo Hi, I m planning on modyfying a G&P M14 DMR to shoot semi only (Mosfet) at 450 fps with a 11.1 lipo. Anyone had experience with high voltage lipo / mosfet / high fps / semi only combo? Thanks __________________

February 28th, 2011, 19:19	#2
Whiskey formerly BLACKWATER204 Trader rating Join Date: Mar 2010 Location: Winnipeg	It should have a wicked trigger response, just have good trigger discipline as a 450fps "double tap" hurts like a bitch lol. What is the C value of the LiPo battery you're using? __________________ All right, they're on our left, they're on our right, they're in front of us, they're behind us... they can't get away this time! - Lieutenant General Lewis B."Chesty" Puller (when surrounded by 8 enemy divisions) Born to fight, trained to kill, ready to die, but never will.

February 28th, 2011, 19:35	#3
Long_Bong Trader rating Join Date: Dec 2007 Location: Canada	I ll lock it semi with a 2 or 3 sec delay in between not sure which lipo to go for, sugestion? __________________

February 28th, 2011, 20:02	#4
stubs Trader rating Join Date: Oct 2006 Location: calgary	i have ran all 3 of my m14's with both a 7.2v lipo and an 11.1 didn't notice much difference on semi auto but provide amazing trigger response mosfet is a good idea will save you money in the end arcing across the switch can be excessive with the lipos. non of my have a mosfet but will be upgrading to them shortly and i have gun ranging from 380-470 in my m14s lipo is the way to go.

February 28th, 2011, 22:29	#5
phloudernow Trader rating Join Date: Nov 2010 Location: Toronto - Ontario, Vancouver - B.C and Hong Kong	Suggestion would be a King Arms 11.1v 15C lipo, most lipos you should use are around 15C anything above 20C will kill your switch in no time those lipos above 20c are more for RC car racing __________________ Current Lineup: VFC HK416 Custom Custom Bowie Tactical x SAI Glock 17 (TM Base), Custom SAI BLU Glock Build (Timberwolf Base) Custom Zev Noveske Shooting Team Glock 34 Project Guns Custom Zev Dragonfly G17 (Project) (In progress)

February 28th, 2011, 22:38	#6
Sportco would-be wine thief Trader rating Join Date: Dec 2009 Location: St-Hilaire	Si tu veux seulement tirer semi, je ne vois pas quelle avantage tu va avoir Ã* utiliser une 11.1v... Le coup de bÃ©lier sur le systÃ¨me va Ãªtre brutal avec une 11.1v et tu ne dÃ©sire tirer que une ou 2 seconde aprÃ¨s!!! donc l'avantage vitesse de rotation (ROF) que te donne la LIPO 11.1v ne s'applique pas Ã* toi... Corrige moi si je me trompe mais tu serais pas mieux avec une 7.2v sur ton kit MOSFET? Cheers __________________ Level 3 Directory assistance operator Level 1 skapegoat It ain't the years, it's the miles.

February 28th, 2011, 23:01	#7
Long_Bong Trader rating Join Date: Dec 2007 Location: Canada	It for quick trigger response and short noise signature The DMR is for a left handed girl you know well that want to snipe __________________

February 28th, 2011, 23:07	#9
Long_Bong Trader rating Join Date: Dec 2007 Location: Canada	G&P pumped to 450, all else (except spring and trigger master mosfett will be stock) And Gemtech silencer just for you Sportco __________________

March 10th, 2011, 08:46	#15
enemybrit Trader rating Join Date: Jan 2009 Location: Northern Ontario	I am personally using an echo 1 m14 with a guarder sp120 tune up kit, m140 spring, element high torque motor, systema rubber scs and Prometheus ash barrel. I also use a passive breaking mosfet (homade, 1000000000x better than an AB). I am shooting 470 fps with .2g bbs +-2 fps. With .3g bbs I am hitting people out at 170 feet.

M14 DMR with 11.1 v lipo

Upgrades & Modifications