|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 22nd, 2011, 22:51
|
#1 |
|
CYMA AKS74U Muzzle Break Removal, Oranged tip
Hey Guys, I just bought a silencer for my CYMA AKS74U and can't figure out how to take the muzzle break off. I've heard that its glued, but dont want to mess it up by heating it too much. Theres also a pin that comes out of the front end that locks the muzzle break in place. I've heard it mentioned that theres a really small set screw, but cant find it.
So if someone has some pics, or knows a sure fire method I'd really appreciate the help. |
|
|
|
|
April 23rd, 2011, 10:54
|
#2 |
|
formerly GRoy
|
There is a small hex screw that must be unscrewed on the flashhider. It is located on the opposition side of the flashhider when your looking at the pin. Once the hex screw is removed push in the pin and unscrew the flashhider. threading is CCW.
|
|
|
|
|
April 23rd, 2011, 12:34
|
#3 |
|
From the schematic I found for the CM035 I thought there would be a set screw also. However for whatever reason its absent (I thought maybe it would be covered in paint or something so I sanded the paint on the rear portion of the pin holder, still nothing super obvious.
The gun came with an Oranged tip (which was just a plastic sheath on the outside of the muzzle break), but that came off pretty easily. Is it possible that since this gun came with the tip it wasn't meant to have its muzzle break removed? |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
