Kraken Body Swap

[iamnotcody]

Okay, so I have used the search engine and can't really find a video. Who know's maybe I didn't search hard enough. Would anyone know a video for a body swap of the Aftermath Kraken or something alike? I have a clear plastic body and a painted plastic body, and I have no experience taking the gun apart to that extent. I have a metal body but it's currently snapped off in the stock area.

Just throwing this out to those who think the Kraken is shit. I've got a Kraken here thats over two and a half years old with no internal replacements. Still shoots around 400 FPS. Don't want to start a war but Just sayin.

[Mitchell12]

It's a TM clone, I'd normally be rude about how you didn't actually look that hard but I'll show you.
http://www.mechbox.com/ak47/ak47-disassembly.html

That's the dissasembly, Obviously you only need to do enough to get the lower off.

[Coma]

Its easy really.

1- Remove top cover and bolt tray. Don't lose those tiny screws.
2- Remove stock, two screws in the top and two underneath.
3- Remove pistol grip with the single screw underneath.
4- Remove front end by taking out the two screws in the mag well and the two in front of that. Then just slide the entire assembly forwards and off.
5- Remove fire select lever. The button covering it should have a place where you can pry it off. Take out the screw underneath and keep all the washers in order and right side up.

From this point it should be a simple matter of lifting out the mechbox and replacing it in your new body. Then put it all back together again and bingbangboom.

Edit: Dang, beat me by one minute lol but I did it from the top of my head

[iamnotcody]

Alright people thanks for the help.