busted oring

[DreadHead]

I have been gearing up for the new season, I went to oil bath my orings in my pistol mags which were leaking.

This is normally not a problem but as I was putting one mag back together, I managed to pinch the Oring as i slid the bottom of the mag into the main body.
Now that oring has been cut and is beyond repair.

I am wondering if anyone can direct me to where I could purchase a square Oring for a TM 1911 detonics.
I am 99% sure that a standard 1911 oring will work as well.

I have tried searching already and I will continue to search on my own, but if someone already knows of a site or manual that can give me the part number, or has the part for sale I would appreciate it greatly.

Thanks in advance
-JD

[voorhees -FWA-]

Take it to your local automotive supply store and match the o-ring with something like it. I've done this with my M9 and Tornado and M203 grenades, it works like a charm and is cheap!

[DreadHead]

I will give that a try my only consern is that the o ring itself is square in shape.

[Mitchell12]

If it is SQUARE and not rectangular you still might find it locally. You can also try some blue gasket maker as well, might work.

[cetane]

I used standard o-rings to fix up my kjw glock mags that were leaking from the base plate. The original seal was a formed squareish seal but the orings worked good.