|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 19th, 2011, 06:05
|
#1 |
|
Airsoft Suregon complete upgrade combo quality
Hello,
I am building a Hi Capa 5.1 for some IPSC training as well as target shooting.(and perhaps use it for some skirmishes...) I was wondering about the quality of this kit. Is the loading nozzle as good as SHOOTERS DESIGN POM CYLINDERS? Is the piston head as good as the PDI one? And are the springs stiff enough?(compared to the GUARDER 150% springs) Any feedback would be welcomed. Thanks! |
|
|
|
|
July 19th, 2011, 06:06
|
#2 |
|
|
|
|
July 19th, 2011, 12:27
|
#3 |
|
GBB Whisperer
|
1. I think the Shooters Design POM cylinder is nicer. It is tougher, smoother, and harder wearing. However, some users don't like the white colour, so I think the Airsoft Surgeon one is good enough. It is better than the Guarder one. I have not had an Airsoft Surgeon nozzle break on me yet, but have heard about it breaking for a few other users. The inner diameter of the nozzle is a bit less consistent than Shooters Design, and can vary by around ±0.01mm. This can make fitting it to some piston heads very tight (even the one it comes with.)
2. The piston head is pretty much the exact same thing as the PDI one. 3. The springs are stiffer than the Guarder 150% spring. I would consider it to be closer to a 170%. It is that strong. Curious, where are you located? |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
