Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Replica Guns

:

Newbie Tank

Reply
 
Thread Tools
Old December 8th, 2011, 22:44   #1
been8
 
Join Date: Dec 2011
Replica Guns

I'll keep this simple, very new here and without disrespecting anyone I have no interest in shooting airsoft guns. I am interested in owning replicas of guns (seems so far airsoft is the only way) however they are quite pricey for something that will essentially be collected.

Any options here? looking for an HK 416 and MP5 at the moment. Please point me in the right direction.

I ask this because I want to know if its worth taking the time to get AVed.
been8 is offline   Reply With Quote
Old December 8th, 2011, 23:17   #2
Pinard
formerly Contractor 6-8, CptPinard17eRAM
 
Pinard's Avatar
 
Join Date: Apr 2010
Location: Quebec
Quote:
Originally Posted by been8 View Post
I'll keep this simple, very new here and without disrespecting anyone I have no interest in shooting airsoft guns. I am interested in owning replicas of guns (seems so far airsoft is the only way) however they are quite pricey for something that will essentially be collected.

Any options here? looking for an HK 416 and MP5 at the moment. Please point me in the right direction.

I ask this because I want to know if its worth taking the time to get AVed.
if its only for collecting you could easily go with low ends replica but they will more than likely be clear so you'll have to paint them.

you could find those model around 300$ each

these are the only way to have ''replicas'' in canada since it is illegal to have replicas. Those are able to wound people so they are not considered replicas while being almost identical to their real steel counterparts.
__________________
Retired chairsofter
Pinard is offline   Reply With Quote
Old December 8th, 2011, 23:24   #3
been8
 
Join Date: Dec 2011
thanks for the reply. I have been scouring the web for 416 airsofts and I think the cheapest I found was $480 or so, is it worth getting AVed to see what else there is available?
been8 is offline   Reply With Quote
Old December 8th, 2011, 23:24   #4
Kokanee
Ministry of Peace
 
Kokanee's Avatar
 
Join Date: Mar 2002
There is a small but active collector community here, well worth your time to get AV'd.
Kokanee is offline   Reply With Quote
Old December 8th, 2011, 23:30   #5
been8
 
Join Date: Dec 2011
Will do, looks like im getting verified.

Any websites you can point me to at the moment? I currently own an umarex pistol which I got a great deal on, more of their products are welcome.
been8 is offline   Reply With Quote
Old December 8th, 2011, 23:32   #6
Eeyore
Suburban Gun Runner
 
Join Date: Jan 2009
Location: St Lambert, Quebec
Quote:
Originally Posted by been8 View Post
Will do, looks like im getting verified.

Any websites you can point me to at the moment? I currently own an umarex pistol which I got a great deal on, more of their products are welcome.
Unfortunately we won't help you obtain airsoft until you have an AV tag. This is to keep airsoft out of the hands of minors and to protect our sport.

Thanks for understanding.
__________________
Quote:
Originally Posted by Pinard View Post
eeyore, the more I look at your avatar, the more I find it looks like a vagina...
http://i.imgur.com/wBfBB.gif
Eeyore is offline   Reply With Quote
Old December 9th, 2011, 00:00   #7
MaciekA
 
MaciekA's Avatar
 
Join Date: Jun 2011
Location: Portland, Oregon, USA
Quote:
Originally Posted by been8 View Post
Will do, looks like im getting verified.

Any websites you can point me to at the moment? I currently own an umarex pistol which I got a great deal on, more of their products are welcome.
If you get AV'd you'll be able to find quite a few MP5s and 416s on the market. If you watch the classifieds for a week or two you'll see them go by at various price points and quality levels. For what it's worth, the Umarex MP5 is absolutely wonderful. Shoots, feels, and looks like a million bucks. If you were lazy, you could easily find the G&G non-Umarex, non-trades versions of these as well, but if you're patient you'll find the good stuff.

Get AV'd as quick as you can and re-post in the age-restricted part of the forum.
MaciekA is offline   Reply With Quote
Old December 9th, 2011, 00:22   #8
been8
 
Join Date: Dec 2011
excellent replies. thanks everyone.
been8 is offline   Reply With Quote
Old December 9th, 2011, 12:12   #9
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
If it's just a display piece there are .177 MP5's available in Canada for dirt cheap too.

MP5K PDW: http://www.dlairgun.com/Air-Rifles/Heckler-Koch/

I'm 99% sure I've seen a standard .177 MP5-A2 or something like that but I can't recall exactly where.

As for the 416 I have no clue but Anschutz makes an "AiR-15" that's more like a M16 than anything. Only problem is that you can't really modify it since the handguard has a CO2 tank in there. Your best bet other than that is probably to get AV'ed and snatch one up. Hell, if it's just for show then buy a broken one and have it up on your wall or whatever.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old December 14th, 2011, 00:19   #10
been8
 
Join Date: Dec 2011
seeking some help here as a noob.

First off is this site legit? and is that product worth that price tag?

http://mach1airsoft.com/site/node/779

Last edited by been8; December 14th, 2011 at 00:23.. Reason: forgot to add link
been8 is offline   Reply With Quote
Old December 14th, 2011, 00:25   #11
JonsM4
 
JonsM4's Avatar
 
Join Date: Aug 2009
Location: What's my 20?
1. Yes, legit.
2. Get Age verified.
__________________
King Arms M4A1 Colt : ICS M4 C-15 : KJW G23
JonsM4 is offline   Reply With Quote
Old December 14th, 2011, 00:28   #12
ShadowNet
 
ShadowNet's Avatar
 
Join Date: Mar 2008
Quote:
Originally Posted by been8 View Post
seeking some help here as a noob.

First off is this site legit? and is that product worth that price tag?

http://mach1airsoft.com/site/node/779
Mach1Airsoft is definitely a reputable Canadian airsoft retailer. I have that exact HK416 in question. It is the best HK416 on the market at the moment, and is licensed by H&K. You can definitely get a better price in the AV classifieds though. There is actually one for sale right now.
__________________
ShadowNet is offline   Reply With Quote
Old December 14th, 2011, 01:29   #13
SuperCriollo
 
SuperCriollo's Avatar
 
Join Date: Apr 2009
Location: Kitchener, ON
If you are going for realism, you best bet is getting a GBB (gas blowback rifle). WE makes a pretty decent 416, you may want to take a look at it.
__________________

SuperCriollo
SuperCriollo is offline   Reply With Quote
Old December 14th, 2011, 01:58   #14
been8
 
Join Date: Dec 2011
Quote:
Originally Posted by ShadowNet View Post
Mach1Airsoft is definitely a reputable Canadian airsoft retailer. I have that exact HK416 in question. It is the best HK416 on the market at the moment, and is licensed by H&K. You can definitely get a better price in the AV classifieds though. There is actually one for sale right now.
I am in the process of getting AVed. This is more for a collection I jsut want to be sure I can customize it with grips and sights. Also If you do not mind I would love to see some pics of your's so I get an idea of what an actual one looks like then a standard pic of Umarex's site.
been8 is offline   Reply With Quote
Old December 14th, 2011, 03:28   #15
ShadowNet
 
ShadowNet's Avatar
 
Join Date: Mar 2008
PM'd.
__________________
ShadowNet is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 02:05.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.