Changing ESS Turbofan Goggles Lens?

jaipex · January 5th, 2012, 00:55

I recently picked up ESS turbofan goggles from ehobbyasia (http://shop.ehobbyasia.com/ea-gear-t...set-black.html) but I can't seem to figure out how to pull it apart to change the lens.. does anyone have any suggestions?
I tried this manual here (http://www.esseyepro.com/uploads/gui...e_TurboFan.pdf) but I can't seem to find any part that feels like it'll come apart without physically tearing it or ripping the goggles apart.

Danke · January 5th, 2012, 01:03

I have the real ESS goggles and I just grab the frame and flex it apart. The lenses pop in and out no problem.

Maybe the clone ones have the clear part glued in so it won't pop out at the wrong time?

Darklen · January 5th, 2012, 12:57

Yup. The frame just pulls off the lenses. Be advised, the Ehobby goggles are clones and real ESS lenses do not fit. The notches in the real ESS lenses are smaller and won't lock into the frame of the clones.

jaipex · January 5th, 2012, 14:55

Ahh here was my problem. I was thinking I had to pull the front and back apart (which made no sense since there was no separation) but really it's just pulling back the edges that cover the lens. Thanks!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 5th, 2012, 00:55	#1
jaipex Trader rating Join Date: Jan 2007 Location: Montreal, QC / Trenton, ON	Changing ESS Turbofan Goggles Lens? I recently picked up ESS turbofan goggles from ehobbyasia (http://shop.ehobbyasia.com/ea-gear-t...set-black.html) but I can't seem to figure out how to pull it apart to change the lens.. does anyone have any suggestions? I tried this manual here (http://www.esseyepro.com/uploads/gui...e_TurboFan.pdf) but I can't seem to find any part that feels like it'll come apart without physically tearing it or ripping the goggles apart.

January 5th, 2012, 01:03	#2
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I have the real ESS goggles and I just grab the frame and flex it apart. The lenses pop in and out no problem. Maybe the clone ones have the clear part glued in so it won't pop out at the wrong time? __________________ Airsoft, where nothing is hurt but feelings.

January 5th, 2012, 12:57	#3
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	Yup. The frame just pulls off the lenses. Be advised, the Ehobby goggles are clones and real ESS lenses do not fit. The notches in the real ESS lenses are smaller and won't lock into the frame of the clones. __________________ *ASC Age Verifier for Red Deer & Area Alberta*

January 5th, 2012, 14:55	#4
jaipex Trader rating Join Date: Jan 2007 Location: Montreal, QC / Trenton, ON	Ahh here was my problem. I was thinking I had to pull the front and back apart (which made no sense since there was no separation) but really it's just pulling back the edges that cover the lens. Thanks!

Changing ESS Turbofan Goggles Lens?

Newbie Tank