TM m4a1 battery

e30_325i · June 22nd, 2005, 20:13

I have a stock TM m4a1 and i feel that the 8.4v 600MAH battery is too small, is it possible to use a 9.6v 1100MAH nunchuck battery. would the battery fit in the handguards if i remove the fuse support.

any help would be appreciated.

thanks

DogHunter · June 22nd, 2005, 20:37

I kill you all the time with my ak :snipe: :snipe: :duke: :infantry: :rocket: :roll: :borg: :xmas: :twisted: :razz: :zzz: :smack:

budsmoke · June 23rd, 2005, 13:03

Wow Doghunter... I thought these forums had an age limit...

or maybe you just smoke too much?

budsmoke · June 23rd, 2005, 13:04

And Mr. OldBmw why don't you try searching the forums....

budsmoke · June 23rd, 2005, 14:17

Call Harry

budsmoke · June 23rd, 2005, 14:18

I'm not budsmoke man!

Greylocks · June 23rd, 2005, 19:15

If your gun is 'stock', remember that it was designed to use 8.4 volts, not more.

The rest of what you seek is written.

rat · June 23rd, 2005, 19:52

yes nunchuck batteries fit inside a stock m4. 9.6 will increase your ROF.

Shutter · June 24th, 2005, 02:37

I am by far not an expert on the subject, but I feel the following insights that I've discovered may help you.

A nunchuck battery should fit in the foregrips of an m4. As far as voltage is concerned, the extra voltage on the 9.6 will give your m4 a little more "snap" resulting in an increased RoF. The downside to this of course is that extra snap is additional strain on the internals of your weapon. If you plan on using the 9.6v battery, plan on upgrading plastic gears and bushing to metal ones at the same time and you should be fine.

Totally as a side note, unless you're the kind of person who likes to spray and pray, the increased RoF isn't a big selling feature. The fact is, you can play approximatly 2.5-3x longer with the nunchuck battery, which will make alot of difference in the field. If your main field is an indoor arena like XT here in Winnipeg, having a mini battery should be fine. Not only are indoor games shorter, but even if it does die in the fight, its only a couple steps away to a charging area.

bruce · June 24th, 2005, 04:19

VP: not trying to flame you or anything but FYI, there is no plastic gears in the mechbox.

Shutter · June 24th, 2005, 13:35

This is why I said I'm far from an expert. I assumed since everything I read says to get new metal gears, the original gears must be something other than metal.
(noob question)If they're metal gears already, whats the big deal about upgrading them?(/noob question)

bruce · June 24th, 2005, 14:27

Stock gears are made of some kind of aluminum alloy which is fine for stock springs and some upgraded springs. If you're planning to use heavier springs, replacing them with a steel alloy gear set would increase the resistance to wear and tear.

pr5owner · July 27th, 2005, 06:18

dont use higher voltage if your not gonna upgrade your internals, just throw away your crappy NICD and get a respectable one or BUILD your own, you can get TWO 1100MAH minis that are a direct replacement for your 600MAH for $32CDN SHIPPED

OR you can go to costco and buy 8 2300MAH NIMH AA Sanyo Cells and make a 7 cell battery for 20 dollars or less

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 22nd, 2005, 20:13	#1
e30_325i Trader rating Join Date: Apr 2005 Location: Port Elgin, ON.	TM m4a1 battery I have a stock TM m4a1 and i feel that the 8.4v 600MAH battery is too small, is it possible to use a 9.6v 1100MAH nunchuck battery. would the battery fit in the handguards if i remove the fuse support. any help would be appreciated. thanks

June 24th, 2005, 02:37	#9
Shutter Previously known as Volatile Psychosis Trader rating Join Date: Jun 2005 Location: Winnipeg, MB	I am by far not an expert on the subject, but I feel the following insights that I've discovered may help you. A nunchuck battery should fit in the foregrips of an m4. As far as voltage is concerned, the extra voltage on the 9.6 will give your m4 a little more "snap" resulting in an increased RoF. The downside to this of course is that extra snap is additional strain on the internals of your weapon. If you plan on using the 9.6v battery, plan on upgrading plastic gears and bushing to metal ones at the same time and you should be fine. Totally as a side note, unless you're the kind of person who likes to spray and pray, the increased RoF isn't a big selling feature. The fact is, you can play approximatly 2.5-3x longer with the nunchuck battery, which will make alot of difference in the field. If your main field is an indoor arena like XT here in Winnipeg, having a mini battery should be fine. Not only are indoor games shorter, but even if it does die in the fight, its only a couple steps away to a charging area. __________________ Life is cheap, film is cheaper.

June 24th, 2005, 04:19	#10
bruce Super Moderator Trader rating Join Date: Aug 2003 Location: Montreal	VP: not trying to flame you or anything but FYI, there is no plastic gears in the mechbox. __________________ bruce: Team Bad Karma-(BK-05) : Special Battalion East-(SBE-01)

June 22nd, 2005, 20:37	#2
DogHunter Trader rating Join Date: May 2005 Location: Port Elgin	I kill you all the time with my ak :snipe: :snipe: :duke: :infantry: :rocket: :roll: :borg: :xmas: :twisted: :razz: :zzz: :smack:

June 23rd, 2005, 13:03	#3
budsmoke Trader rating Join Date: Jun 2005 Location: Canada	Wow Doghunter... I thought these forums had an age limit... or maybe you just smoke too much?

June 23rd, 2005, 13:04	#4
budsmoke Trader rating Join Date: Jun 2005 Location: Canada	And Mr. OldBmw why don't you try searching the forums....

June 23rd, 2005, 14:17	#5
budsmoke Trader rating Join Date: Jun 2005 Location: Canada	Call Harry

June 23rd, 2005, 14:18	#6
budsmoke Trader rating Join Date: Jun 2005 Location: Canada	I'm not budsmoke man!

June 23rd, 2005, 19:15	#7
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	If your gun is 'stock', remember that it was designed to use 8.4 volts, not more. The rest of what you seek is written.

June 23rd, 2005, 19:52	#8
rat Trader rating Join Date: Feb 2005 Location: Montreal, PQ	yes nunchuck batteries fit inside a stock m4. 9.6 will increase your ROF.

June 24th, 2005, 13:35	#11
Shutter Previously known as Volatile Psychosis Trader rating Join Date: Jun 2005 Location: Winnipeg, MB	This is why I said I'm far from an expert. I assumed since everything I read says to get new metal gears, the original gears must be something other than metal. (noob question)If they're metal gears already, whats the big deal about upgrading them?(/noob question) __________________ Life is cheap, film is cheaper.

June 24th, 2005, 14:27	#12
bruce Super Moderator Trader rating Join Date: Aug 2003 Location: Montreal	Stock gears are made of some kind of aluminum alloy which is fine for stock springs and some upgraded springs. If you're planning to use heavier springs, replacing them with a steel alloy gear set would increase the resistance to wear and tear. __________________ bruce: Team Bad Karma-(BK-05) : Special Battalion East-(SBE-01)

July 27th, 2005, 06:18	#13
pr5owner Trader rating Join Date: Oct 2004 Location: Calgary, AB	dont use higher voltage if your not gonna upgrade your internals, just throw away your crappy NICD and get a respectable one or BUILD your own, you can get TWO 1100MAH minis that are a direct replacement for your 600MAH for $32CDN SHIPPED OR you can go to costco and buy 8 2300MAH NIMH AA Sanyo Cells and make a 7 cell battery for 20 dollars or less __________________

TM m4a1 battery

Upgrades & Modifications