|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 30th, 2012, 15:33
|
#1 |
|
CA UMP folding stock compatibility
hey guys,
i bought a classic army UMP and while i was folding the stock for storage, the plastic on the hinges gave way and it literally tore off. so now i'm looking for a replacement stock and i was wondering if this UMP style stock made by ECHO1 would work with my CA: http://albertaairsoft.com/webstore/g...ing-stock.html thanks.
__________________
"Do the interns get Glocks?" |
|
|
|
January 31st, 2012, 00:12
|
#2 |
|
No, it wont fit. Its a UMP STYLE stock for a MP5. Different dimensions. You will probably have to get one from Ca, or G&G, onee that is actually made for a UMP
|
|
|
|
|
|
February 18th, 2012, 17:49
|
#3 |
|
|
i ended up ordering the stock and it does work. i was able to install it onto the hinges of my CA UMP. however, the dimensions are a little off and once the stock is on, it will not lock into place once its folded. not a big problem for me as i rarely ever use the gun in the folded position.
once attached, the stock is just as rock solid as the original one and looks just as good. i may even say the plastic on the hinges of this clone stock is stronger than that of the original CA one. its a hard plastic that seems way tougher. i've known of 3 different cases where the stock snapped on these classic army UMPs. so, i hope this helps anyone who has the same problem i did.
__________________
"Do the interns get Glocks?" |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
