Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

question about V2 spring guides

:

Doctor's Corner

Reply
 
Thread Tools
Old March 8th, 2012, 15:03   #1
Jimski
 
Jimski's Avatar
 
Join Date: Jun 2005
Location: Montreal
question about V2 spring guides

hello all,
while upgrading my G3 (M41)'s V2 gearbox I noticed that there is a threaded hole at the back of the spring guide for a big screw that hold a plastic part at the back outside of the gearbox.
Is that standard? i.e. will it be present on whatever upgrade spring guide I buy ?
I searched in google images but it's not clear.

thank you!
__________________
Jimski is offline   Reply With Quote
Old March 8th, 2012, 15:23   #2
Drake
E-01
 
Drake's Avatar
 
Join Date: Dec 2001
Location: Montreal, QC
That hole is what your buffer stock screw will thread into.

The plastic (usually rubber) pad at the back of the mechbox is just a spacer.


And on that note, it's also why if/when you overtighten the stock screw you can pull the mechbox out of alignment (nozzle) and end up with feeding issues and body pins that "mysteriously" become too snug.
__________________
Drake is offline   Reply With Quote
Old March 8th, 2012, 15:26   #3
Jimski
 
Jimski's Avatar
 
Join Date: Jun 2005
Location: Montreal
ah, excellent, ok.
thanks!
__________________
Jimski is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 12:50.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.