Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

VFC MP5 GBB Help! (With pics)

:

Doctor's Corner

Reply
 
Thread Tools
Old August 8th, 2012, 04:05   #1
{CF}Jarzin
 
Join Date: Mar 2010
Location: Toronto
VFC MP5 GBB Help! (With pics)

Hello everyone!

For some reason a bb keeps getting stuck as it leaves the mag. The gun wont shoot. I have attached 3 pictures of where the BB gets stuck and dont know what to do. the BB gets really stuck (Need a screw driver and a hammer to dislodge bb's, but they always get stuck). The gun did fire for a short time... (The bolt does action forward and back, but it also gets stuck back in the back position from time to time. Im fairly certain it just needs lube in that sense... When ever it gets stuck i take it apart and it will usually slide back forward after a bit of love)

Help!? - Im no expert!

Thanks!

Dan



{CF}Jarzin is offline   Reply With Quote
Old October 8th, 2012, 21:07   #2
GBBR
Banned
 
Join Date: Sep 2012
Location: Toronto
Send a message via MSN to GBBR Send a message via Skype™ to GBBR
my buddy has the same gun. you cant do anything to fix it. even with after market parts
GBBR is offline   Reply With Quote
Old October 8th, 2012, 21:27   #3
BennyBoy
 
BennyBoy's Avatar
 
Join Date: Jan 2012
Location: Toronto
hi there, use different BBs

Have a VFC G36KV GBBR and had that issue when I first got it. Tried it with ICS BBs and it would do that constantly and was a bitch to remove without the right tools. I changed to Madbull and Bastard BBs and it shoots flawlessly now.

Link to my thread with similiar issue, no one was ever able to help me though but there's a picture of my jam

http://airsoftcanada.com/showthread.php?t=141367

Last edited by BennyBoy; October 8th, 2012 at 21:32..
BennyBoy is offline   Reply With Quote
Old October 8th, 2012, 21:29   #4
HKGhost
 
HKGhost's Avatar
 
Join Date: Nov 2009
Location: Mississauga, ON
Problem has already been dealt with. The issue was the hook on the nozzle broke off and can't push the bb up to the hop up chamber.
__________________
Please email me as I'm not on ASC too often.

Custom Build | Upgrades | Repairs | Maintenance
Contact: ghostgunwork@gmail.com / Private Message
HKGhost is offline   Reply With Quote
Old October 8th, 2012, 22:48   #5
N_Force
 
N_Force's Avatar
 
Join Date: Oct 2006
Location: Toronto, Ontario
suddenly I just can't remember what had happened. I had the same problem in day one, as what HKghost said, check the bb pushing pin right under the nozzle if it is wear or broken, but also remove the handle, take a look from the top and check the cocking tube barrel and the lower shooting barrel, see if they are vertical parallel. It happened on my mp5a2 and broke the bb pushing pin in day one. I had to replace the nozzle and get extra bolt set in case it may happen again. This VFC manufacturing quality is soooo poor. I complainted to Umarex but they refered me to US Umarex that they don't even carry this products at all. Also chopping bb's, I did lightly file smooth the bb path. That's all I remember now since last November.
__________________
aka Uncle


Last edited by N_Force; October 8th, 2012 at 22:59..
N_Force is offline   Reply With Quote
Old October 8th, 2012, 23:00   #6
HKGhost
 
HKGhost's Avatar
 
Join Date: Nov 2009
Location: Mississauga, ON
The stock VFC nozzle for the MP5 suck balls. Good thing there's aftermarket polycarbonate ones available, and an aluminum one too. But the best thing to do to prevent this, is to have the bolt lock back before inserting the mag, or don't fill the mag to max bb capacity. Remove 1-2 bbs and you shouldn't have anymore breakage. Practice locking back the bolt is something I recommend for all GBBR owners.
__________________
Please email me as I'm not on ASC too often.

Custom Build | Upgrades | Repairs | Maintenance
Contact: ghostgunwork@gmail.com / Private Message
HKGhost is offline   Reply With Quote
Old October 9th, 2012, 00:12   #7
Chris26
 
Join Date: Jan 2011
Location: Port Coquitlam, BC
Quote:
Originally Posted by HKGhost View Post
Practice locking back the bolt is something I recommend for all GBBR owners.
+1 to that
Chris26 is offline   Reply With Quote
Old October 9th, 2012, 00:27   #8
BennyBoy
 
BennyBoy's Avatar
 
Join Date: Jan 2012
Location: Toronto
i can't insert my mag without locking it back
BennyBoy is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 22:39.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.