VSR vs Hicapa Barrel

[Styrak]

Bear with me here and my crazy shenanigans.

Standard Hicapa barrel ends look like this:



Now, Hicapa (along with a few other TM pistols) use the same hopup rubber as VSR. However VSR barrel ends look like this:



If I wanted to use a VSR barrel in a Hicapa hopup unit, would it even work? Could I just remove the extra material? I'm doubtful since there's different index cuts on the barrel.

[Styrak]

Well if anyone wants to know, I figured out that picture of a PDI barrel isn't a standard VSR barrel. The stock TM VSR style and TM pistol style are identical.

No problems, happy happy!

[Kos-Mos]

Yup, We installed a VSR G-Spec barrel in a hicapa... with a big silencer...

It gives not advantage what so ever. And the gun can't cycle half the time...

You would need to use a fixed barrel and a frame-mounted comp/silencer...

And no one makes a stock kit for the capa.... could probably mod a scope mount to make one though...

[Styrak]

Hehe, I didn't tell you the other details.

SAS Strike Kit (support for the supressor and barrel, with threads), supressor.

[Kos-Mos]

Yes, but you still need a fixed barrel kit, because the stock mech rocks the barrel at an angle. You can either bore out the stock/regular bull barrel and have sloppy accuracy or install a fixed kit.

[ozzy5]

or a we dragon

[shootersaber]

VSR & Hi-Capa barrel is same design. Same Hop up rubber no any issue.

[R.I.T.Z]

had a shortened vsr barrel in my tm mk23 it ran to the end of the silencer, the only mods done where cutting off the bridge and re crowning the end.