Is v6 cylinder head interchangeable with v7?

[Doubleagent]

Hey, does anyone knows if v6 cylinder head interchangeable with v7? I have problem finding a cylinder head for my P90 but I did some research and the cylinder head for the M14 looks alike. I would appreciate any help with this info.
Thanks.

[coach]

they are not the same. have you really tried looking or are you just saying that to get spoon fed?

v6 head - http://www.airsoftparts.ca/store2/in...roducts_id=964

p90 cylinder head - http://www.torontoairsoft.com/Modify...90_p_1719.html

[Doubleagent]

I have spent all day looking but any one has yet to comment on both or say what the difference is. Most places that sell them is out of stock.

[Kos-Mos]

Originally Posted by coach

they are not the same. have you really tried looking or are you just saying that to get spoon fed?

v6 head - http://www.airsoftparts.ca/store2/in...roducts_id=964

p90 cylinder head - http://www.torontoairsoft.com/Modify...90_p_1719.html

Coach, your pictures are wrongs and both of theses are exactly the same piece.

V7 has the feed tube at the very top (no wall above the tube).
V6 is like the first link.

Short story, get the right one, no they are not interchangeable. Otherwise it would be for stated for V6/V7.

[coach]

Not my pictures, but they are the correct parts. Blame the vendor for using stock pictures not me.

He claimed he couldn't find a v6/p90 cylinder head. I found it in seconds.

I did not state that any of my links were a v7. There was no point in showing the difference since a v6/p90 cylinder head could easily be found, so please STFU!

[Kos-Mos]

Originally Posted by coach

Not my pictures, but they are the correct parts. Blame the vendor for using stock pictures not me.

He claimed he couldn't find a v6/p90 cylinder head. I found it in seconds.

I did not state that any of my links were a v7. There was no point in showing the difference since a v6/p90 cylinder head could easily be found, so please STFU!

Did you even read the OP's question?

He specifically asked if a V7 cylinder head was the same as a V6.

Now you STFU.

[coach]

Originally Posted by Doubleagent

I have spent all day looking but any one has yet to comment on both or say what the difference is. Most places that sell them is out of stock.

I linked you two locations that sell the correct part and are in stock. Try harder next time! The V6 and p90 links are for the same thing.

Disregard the TA picture as its a stock image for a V2/3 head.

[coach]

Originally Posted by Kos-Mos

Did you even read the OP's question?

He specifically asked if a V7 cylinder head was the same as a V6.

Now you STFU.

Yes and I said they were different and proceed to show him where the correct one could be bought.

His comment:

Originally Posted by Doubleagent

I have problem finding a cylinder head for my P90 but I did some research and the cylinder head for the M14 looks alike. I would appreciate any help with this info.
Thanks.

Ok so I disregarded his query the second time around but had already stated they were different. Do you go around answering the same question twice? I solved his problem so deal with it douche bag!

[Doubleagent]

Thanks guys for the info. For clarification reason I must say that most of the time I spent searching was for any info about the difference between the two version cylinder head. Also I wanted to get a cylinder head that was close to me so I could get it now and did not have to wait on shipping but thanks for the link and info it really did help. Other people benefit from these forum information too, sorry for the trouble.