M4 No Stock conversion

[SMIC4]

Hello,

I was wondering if anyone can give me tips on how I can convert my m4 so that it has no stock like the one here:
http://ehobbycanada.ca Airsoft Baby Pig
My front end is similar, but my TM m4 receiver has a plastic part sticking out for the stock buffer tube. I rather not cut it but I can't seem to find a receiver that does not have this part. Also what part would you need to plug the hole at the back? The sling plates usually have some sort of hole in it! Any recommendations would be helpful.

^^^
The url has changed if anyone was wondering :P
TacticalAirsoftCanada.com

[R.I.T.Z]

you have to cut it, there is no way around that, there are no aftermarket recievers(that i've seen) without the tabs.
the only receivers that do not have the stock tabs are GBBR's and they are not compatible with AEGs.

[m102404]

Can't do it with a TM receiver.

Some metal bodies have a "screw" that fits into the rear of the receiver (sort of like the Star/Ares M4 IIRC) so you can chop the stock tube stub and fix a back plate to it.

[Danke]

Systema doesn't have that stub.

[R.I.T.Z]

Originally Posted by Danke

Systema doesn't have that stub.

Systema is also 1500$+ and based off the RS

[vondnik]

Originally Posted by m102404

Can't do it with a TM receiver.

Some metal bodies have a "screw" that fits into the rear of the receiver (sort of like the Star/Ares M4 IIRC) so you can chop the stock tube stub and fix a back plate to it.

I've done it with tm receiver without any issues. Just screw the sling plate into the rear of the gearbox and ypu are good to go

[L473ncy]

You're probably going to want an AR "pistol" endplate/plug. ie. Spikes Tactical AR pistol plug.

[Drake]

Or just buy a pistol.

[SMIC4]

I can't be bothered with GBB! Receivers aren't cheap! At those prices, might as well buy the whole damn gun!

[Viperfish]

wait, how would that gun even work? where would the bolt go when recoiling?

[R.I.T.Z]

Originally Posted by Viperfish

wait, how would that gun even work? where would the bolt go when recoiling?

we're talking about an AEG.
not real life.
who knows maybe its one of those fancy new fangled piston driven ones....

[Viperfish]

Originally Posted by R.I.T.Z

we're talking about an AEG.
not real life.
who knows maybe its one of those fancy new fangled piston driven ones....

I was referring to if this was to be done using gbbr parts.

[R.I.T.Z]

Originally Posted by Viperfish

I was referring to if this was to be done using gbbr parts.

then it'd have to be a patriot kit.

[m102404]

Originally Posted by vondnik

I've done it with tm receiver without any issues. Just screw the sling plate into the rear of the gearbox and ypu are good to go

I stand corrected...thank you. Of course that would do it. I was stuck thinking about how it would attach to the receiver vs. the mechbox.

[Danke]

I guess the OP should list his budget for the project.