|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 26th, 2005, 07:04
|
#1 |
|
Custom Battery Needed?
hi i have a stock tm aug right now and i absoluty love it but ima fallin short of the target most of the time and my friends purposly put there aegs on like 400 fps to try each other and i have a 285 fps so i was thinking about getting a pdi 150% or systema m120 spring with systema metal bushings to get me up there with my so-called buds -__________- and i need to knwo what battery would be best i was trying to get a 9.6v 1900 mAH batt. but no one seems to have anything above 1400 mAH for an aug so do i need a custom battery? plz help
|
|
|
|
July 26th, 2005, 07:19
|
#2 |
|
You just need the PDI150 (avoid the Systema M120), and metal bushings, and practice, and knowing how to adjust your hopup properly according to the BB weight you use.
|
|
|
|
|
July 26th, 2005, 07:23
|
#3 |
|
|
fdsa
okay but i need to know if i need a new battery and what size ps ima using a 8.4v 600mAH mini for the aug
__________________
Why didya shoot em'? i felt like it stupid -_________- prim:aug sec:m11 backup:glock19 gbb backup backup:nbb derringer type gun |
|
|
|
|
July 26th, 2005, 07:48
|
#4 |
|
Banned
|
Before anyone yells/flames you, You might wanna reduce that size of that picture there, its pretty MASSIVE. :wink:
Anywho, You can get any retailer or person famailiar with Aug's to make you a battery. Just tell them the voltage (8.4 or 9.6) & how much mah (600,1000,1500,ect) you want and you need it to fit in the Aug, they'll help you out, and if they can't they'll probaly direct you to where you wanna go. I hear people tend to like using 9.6v 1500mah "Aug" type batteries and they run very well. Hope that helps. :wink: BTW, Welcome to ASC. 
|
|
|
|
|
July 26th, 2005, 07:59
|
#5 |
|
|
cant do too mcuh with the pic over here at command only link to life in the us is a sat. com internet link so i'll just take that off and i liked the towel idea shemagh lol =D i'll do that
__________________
Why didya shoot em'? i felt like it stupid -_________- prim:aug sec:m11 backup:glock19 gbb backup backup:nbb derringer type gun |
|
|
|
|
July 26th, 2005, 09:38
|
#6 |
|
http://www.greathobbies.com/
Call those guys in PEI. They made two aug batteries for me, 9.6v 2300 mah. They should still have the design on hand. |
|
|
|
|
|
July 26th, 2005, 18:27
|
#7 |
|
|
Guys, he's in Iraq right now (US soldier)... ordering from Canada may be a bitch.
|
|
|
|
|
July 27th, 2005, 06:09
|
#8 |
|
8.4v battery 3300mah (LARGE)
9.6v battery 3300mah (LARGE) 10.8v battery 3300mah (LARGE) you can get any of these whenever you want from http://stores.ebay.ca/All-Batteries-Outlet if you dont trust the seller look at his feedback, 27333 positive feed back on ebay at a 99.3% positive ratio
__________________
|
|
|
|
|
July 27th, 2005, 09:56
|
#9 | |
|
Quote:
|
|
|
|
|
|
July 28th, 2005, 04:58
|
#10 |
|
|
you can get rectangular batteries from the dealer on ebay
__________________
|
|
|
|
|
January 14th, 2006, 01:09
|
#11 |
|
Banned
|
can someone help me out...point me in the right SITE for a custom battery for a crane stock with a MINI plug?
|
|
|
|
|
January 14th, 2006, 01:30
|
#12 |
|
Scotty aka harleyb
|
www.unipros.com will do custom batteries for extremely good prices.
__________________
|
|
|
|
|
January 15th, 2006, 13:18
|
#13 |
|
I was browsing that site above and I came to the following question, what size are the cells we typically use for airsoft? On the site, they have 1/3A, 2/3A, 4/5A, A, so I'm assuming these are amp ratings. So what voltage do these cells run at; 1.2? Or, do the cells have an overall rating of 1/3 of an amp? Meaning, if I wanted to make a 2 amp battery, I would need 6 cells? This does not make sense to me because a 6-cell pack will only be 7.2 volts. What size cell should I use to make a battery pack of 9.6 volts?
In my mind, I would need to use 8, 1.2v cells of the correct mah rating. Cheers, Brent
__________________
“You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper |
|
|
|
|
|
January 15th, 2006, 16:34
|
#14 |
|
the cells are all 1.2v each. the milliamp capacity assigned for each cell is what the mah capacity of the battery will be. to get the desired voltage, you connect the cells in series, so for 8.4v you connect 7 x 1.2v in series = 8.4v. for 9.6v it's 8 cells, for 10.8 it's 9, etc. the current capacity/cell in series = complete battery current capacity, but voltage is additive. in a parallel arrangement (not recommended unless you really are an expert in electronics) the voltage /cell = complete battery voltage while current capacity is additive. as far as size goes, cell size is an indicator of current capacity, but the voltage will be 1.2v/cell for the batteries we use.
|
|
|
|
|
January 15th, 2006, 16:44
|
#15 |
|
Scotty aka harleyb
|
As for sizes, "large" batteries use Sub-C or SC cells, "mini" batteries use 2/3A cells. Custom batteries, such as butterfly/nunchuck, as well as AUG, P90 J-batteries, and some G36 batteries use A cells.
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
