December 9th, 2012, 05:34 | #1 |
♥ LOVES helmets! ♥
Don't shoot me more than 10 times or I'll charge you! |
Toronto airsoft screw up?
Just bought a smart charger and battery from Toronto airsoft.
Here is a picture of what it came with.... Am I missing something here what is the black connecter suppose to plug into??? He said all I need is this battery and this smart charger kit. Every video I watch online says you need the balance charger connection whitch is there but not the basic charger plug in (black one on the battery. Am I missing something, how do I use this thing. Did they not include the proper wiring harness I needed. ? Any help is very appreshiated. The battery was 35$ (lipo) Charger 75$ ( intelligent balance charger) ev650a Quattro |
December 9th, 2012, 05:55 | #2 | |
Quote:
My recommendation is to switch your gun and battery to Deans. But if you don't want to go that route you'll need an adapter. EDIT: If the salesman said these two items would work together then TA needs to supply the correct lead (banana plugs to Tamiya) or a Deans to Tamiya adapter. Just email or call them to resolve it. Last edited by DustMagnet; December 9th, 2012 at 06:15.. |
||
December 9th, 2012, 06:46 | #3 |
♥ LOVES helmets! ♥
Don't shoot me more than 10 times or I'll charge you! |
Thank you very much. Ill call in the afternoon.
|
December 9th, 2012, 08:26 | #4 |
Fainting Goat, Dictator of Quinte West
|
I do not have that model of charger, i have a cheaper one that charges thru the balance leads, is it possible that yours works this way?
|
December 9th, 2012, 08:59 | #5 |
aka coachster
|
The adaptor block above the one with alligator clips is the balancer connector. it's a multi-connector that will allow you to charger lipo's in 2cell, 3cell, 4cell etc...
Plug the balance adaptor into the charger and the battery into that. Not all chargers charge lipo's via both the balancer and power connectors. My madbull charger only charger only charges through the balancer connector. My other smart charger requires both the deans and balancer connectors attached to even begin. |
December 9th, 2012, 09:34 | #6 |
They are closed on Sunday,Monday, and Tuesday. Weds the earliest you can call .
__________________
"Strength and Honour, Faith and Fury. In these four principles is Life defined and Victory achieved." https://www.facebook.com/pages/Bad-K...8&ref=bookmark |
|
December 9th, 2012, 11:05 | #7 |
a.k.a. Greedy
|
Consider changing your gun/battery to deans, it's a superior connector type. If not, get an adaptor as per dustmagnet. You can buy adaptors/connectors and have them switched at your local hobby shop, RC car/plane etc.
If you can get the alligator clips to grip the terminals on the battery that will work too. Last edited by Kozzie; December 9th, 2012 at 11:10.. |
December 9th, 2012, 12:45 | #8 |
TA is usually a hit and miss... not the first they screw up and will not be their last...
|
|
December 9th, 2012, 14:00 | #9 |
Cobalt Caliber
|
Just change over to deans.... Tyamia are shityy connectors.
|
December 9th, 2012, 14:05 | #10 |
I got a same charger from the same place few monthes ago. it don't have cables for the Tyamia connector.
I use deans anyway.
__________________
|
|
December 9th, 2012, 20:00 | #11 |
♥ LOVES helmets! ♥
Don't shoot me more than 10 times or I'll charge you! |
Just went out to select paintball/ airsoft for the adapter, looks like TA owes me 30$ in gas and 7$ for the adapter.
|
December 9th, 2012, 20:03 | #12 |
Or you could have waited for the reply from the shop...
|
|
December 9th, 2012, 20:12 | #13 |
Crackers
|
|
December 9th, 2012, 20:16 | #14 | |
my mini tamiya are failing on my scar, want to switch to deans but i need an adapter first
__________________
Quote:
|
||
December 9th, 2012, 20:25 | #15 | ||
aka coachster
|
Did you take a look at the description?
http://www.torontoairsoft.com/Intell...er_p_1212.html Quote:
http://www.torontoairsoft.com/M-Mini...or_p_1785.html Quote:
|
||
|
Bookmarks |
|
|