RA-Tech Trigger Issues

[Rob101]

I had just installed an RA tech trigger box in my we C7 project, it has only been tested today with my new co2 mag and in semi it seems to lock up after one shot. Full auto is perfectly fine, its as thought the hammer gets cought on the small piece just above the fire selector. To basically re set the trigger you have to put it to safe then it makes a click an then it shoots and starts the whole process over. I don't know if filling will work or not if anyone can help me out it would be much appreciated, if not I'm rocking an aeg tomorrow ..

[redneck12]

It sounds like your trigger isn't resetting, have you lubed the moving parts in the trigger assembly.

[Danke]

Read this thread, not exactly what you're seeing but a comprehensive how to on that type of issue.

http://www.airsoftcanada.com/showthr...highlight=sear

[turok_t]

very common problem since day 1, which is why i ditched RAtech trigger set since they are not made to spec with the stock counterparts.

[Rob101]

what has to be modded so it will operate properly ?

[turok_t]

Modding it might bit a bit difficult, if u sand/grind too much on rhe hammer/sear hook or might not even catch at all causing your gun to go on full auto. Best thing for your case is to wear it in, cycle the gun 500 or so times to wear out the hooks evenly

[Drake]

Does it work okay with the RATech bolt carrier?

[turok_t]

Originally Posted by Drake

Does it work okay with the RATech bolt carrier?

I'm pretty sure it won't make a difference