AUG feeding issue

legend4411 · June 20th, 2013, 06:48

I have a CA AUG A2, never fielded. It will fire 1 and then 3 blanks and so on. If I wiggle the mag, I can hear a bb pop into place. Then I can shoot the one bb. I have also tried both midcaps and highcap. The stock highcap is slightly better but still not feeding well.

Any help would be appreciated!

venture · June 20th, 2013, 08:18

The AUG feed tube is notorious for causing troubles. Recommended is an aluminum replacement tube.

Like this:
http://www.ventureairsoft.ca/item.ph...2fbb7a6681e0e0

Spike · June 20th, 2013, 08:24

My CA AUG also had bad feeding problems.... fixed with a new hop up unit. The stock CA ones are garbage. Also the feed tube would be a good idea.

legend4411 · June 20th, 2013, 15:50

Which hop up did you get? G&P high performance or G&G metal? I heard there is compression issue with the G&P one.

legend4411 · June 20th, 2013, 19:41

Also, could you tell me which website you buy your hop up from? Thanks!

Spike · June 20th, 2013, 23:56

Lonex... didn't fit 100% perfectly, had to do some fiddling, but it's giving me a good airseal now. 395fps with an m110

legend4411 · July 1st, 2013, 00:05

Quote:

Originally Posted by venture

The AUG feed tube is notorious for causing troubles. Recommended is an aluminum replacement tube.

Like this:
http://www.ventureairsoft.ca/item.ph...2fbb7a6681e0e0

The feed tube doesn't work in CA AUG.

HeloBSG · July 2nd, 2013, 13:05

Usualy with that kind of problem first thing that you should check are the bb's... bio BB's will get stuck in midcap, but if you have a problem with a hicap, and also you dont hear that dumb sound when firing lige the hop up is to tight than you shoud change it couse it is not allowing the magazine to feed it right

This goes for all aegs not just the aug...

Spike · July 2nd, 2013, 13:17

I'm having feeding issues... again. Gonna try to swap out the feed tube when I can.

Spike · July 9th, 2013, 17:29

Thread hijack gooooooooo

CA Aug A2

Feeds with stock hicap only, have tried KA mags and MAG mags, very inconsistent feeding, a lot of dry fire going on. Can anyone else confirm that the Deep Fire nozzle won't fit the CA AUG? And does anyone know where to get one in stock?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 20th, 2013, 06:48	#1
legend4411 Trader rating Join Date: May 2013	AUG feeding issue I have a CA AUG A2, never fielded. It will fire 1 and then 3 blanks and so on. If I wiggle the mag, I can hear a bb pop into place. Then I can shoot the one bb. I have also tried both midcaps and highcap. The stock highcap is slightly better but still not feeding well. Any help would be appreciated! Last edited by legend4411; June 20th, 2013 at 20:12..

June 20th, 2013, 08:18	#2
venture Trader rating Join Date: Jun 2005 Location: Halifax	The AUG feed tube is notorious for causing troubles. Recommended is an aluminum replacement tube. Like this: http://www.ventureairsoft.ca/item.ph...2fbb7a6681e0e0 __________________ Visit us at :www.ventureairsoft.ca

June 20th, 2013, 08:24	#3
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	My CA AUG also had bad feeding problems.... fixed with a new hop up unit. The stock CA ones are garbage. Also the feed tube would be a good idea. __________________ I change primaries like other people change socks.

June 20th, 2013, 15:50	#4
legend4411 Trader rating Join Date: May 2013	Which hop up did you get? G&P high performance or G&G metal? I heard there is compression issue with the G&P one.

June 20th, 2013, 19:41	#5
legend4411 Trader rating Join Date: May 2013	Also, could you tell me which website you buy your hop up from? Thanks!

June 20th, 2013, 23:56	#6
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Lonex... didn't fit 100% perfectly, had to do some fiddling, but it's giving me a good airseal now. 395fps with an m110 __________________ I change primaries like other people change socks.

July 2nd, 2013, 13:05	#8
HeloBSG Trader rating Join Date: Jul 2013	Usualy with that kind of problem first thing that you should check are the bb's... bio BB's will get stuck in midcap, but if you have a problem with a hicap, and also you dont hear that dumb sound when firing lige the hop up is to tight than you shoud change it couse it is not allowing the magazine to feed it right This goes for all aegs not just the aug...

July 2nd, 2013, 13:17	#9
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	I'm having feeding issues... again. Gonna try to swap out the feed tube when I can. __________________ I change primaries like other people change socks.

July 9th, 2013, 17:29	#10
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Thread hijack gooooooooo CA Aug A2 Feeds with stock hicap only, have tried KA mags and MAG mags, very inconsistent feeding, a lot of dry fire going on. Can anyone else confirm that the Deep Fire nozzle won't fit the CA AUG? And does anyone know where to get one in stock? __________________ I change primaries like other people change socks.

AUG feeding issue

Doctor's Corner