|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 19th, 2013, 16:57 | #1 |
Myoga
|
Mosfet reliability and failure modes
How are today's off the shelf airosft mosfets in terms of reliability and failure mode?
The first and last time I tried using a mosfet a couple of years ago, it fried after less than a couple dozen shots over the course of two days. It failed closed, so the aeg wouldn't stop firing on full auto until I unplugged the battery. Freaked out my wife too. I'm thinking about trying a mosfet again, but don't want it to fail and get stuck on full auto. Especially if using a Lipo in a sealed up buffer tube that's cumbersome to get to. |
July 19th, 2013, 17:25 | #2 |
"bb bukakke" KING!
|
don't buy a cheap mosfet unit. I swear by extreme-fire.com products because of Terry's overwhelmingly good service and track record. He has a very low failure rate and his units are very well built.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
July 19th, 2013, 18:24 | #3 |
if you really dont want it to fail, get an extreme-fire.
there are also plenty of homemade fets from reputable makers on ASM.
__________________
too busy tinkering to play. |
|
July 19th, 2013, 19:11 | #4 |
Speaking of ExtremeFire mosfet. Can you disable the AB on the computerized FETs?
Which one would you recommend for ROF control without AB. |
|
July 19th, 2013, 19:45 | #5 |
Look for a hamster fet on ASM, apparently they are amazing and I have one on the way.
__________________
Armoury: TM M4A1 ICS M4A1 JG M4A1 |
|
July 19th, 2013, 20:18 | #6 |
The gate ones stealth has on airsoftstore.ca ok too
|
|
July 19th, 2013, 20:51 | #7 |
The cheetah 2N with triggermaster software let's you turn AB on and off, and let's you control the ROF as well. I have one and it was a great investment. Any problems, and terry usually replies to you in about 24 hours.
__________________
Team VG93 AEG : Custom G&P VLTOR M4 Magpul Masada ACR Bolt action: Tokyo Marui VSR-10 GSPEC |
|
July 19th, 2013, 20:53 | #8 |
I've been using my home-made 3034 mosfet for over 3 years now. Still works fine.
|
|
July 19th, 2013, 20:56 | #9 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Gate merf 3.2. Nuff said. All the features you can shake a stick at round 60 bucks.
__________________
Quote:
FinchFieldAirsoft |
|
July 19th, 2013, 21:32 | #10 |
July 19th, 2013, 21:48 | #11 |
reneorantes
|
I have installed 4 MERF 3.2s on 4 different rifles and have yet to see one fail. I run them on 2 of my own rifles, not able to turn off AB sucks but the other features make up for it.
|
July 19th, 2013, 22:07 | #12 |
ChrisUK
|
+1 for the Gate fet's from airsoftstore. Never had one fail. Not a huge fan of the Xtreme fire fets as I always worry about the wires falling out (which they do often).
__________________
|
July 20th, 2013, 18:39 | #13 |
No matter what anyone says or builds Terry's track record can't be beat. Extreme-fire all the way.
|
|
|
Bookmarks |
|
|