Where to find fill Valve Army Force

[Heerven]

Hi
I bought this 40mm grenade from Army Force
It's a CO2 grenade. Unfortunately it came with a fill valve with no O-Ring included.
I tried Moon dog O-ring and they seems to big. I destroyed 2 of them.
I'm looking for another fill valve with O-ring included

Problem: The valve seems to be not standard. It is bigger than regular valve.
I wonder who can give me information to find this type.
The one with black O-ring.

thanks

[pestobanana]

Take out the O ring, use gasket maker on the threading instead.

[Heerven]

I was talking about the O-ring inside the fill valve. with no O-ring u can't fill with CO2

[jordan7831]

Do you mean the one that interacts with the co2 filler? If it is that super small o ring you can simply break a cheap 1 dollar lighter and get 2 of those o rings from there. Then use a propane adapter to push the oring onto the valve.

Ive tried the moon dog ones as well. The thickness and diameter is to much to fit in the fill valve.

If you have braces, or go to the dentist a lot you can ask for the small elastics they use for braces. Those actually work quite well too.

I made a thread about this a while ago.
http://airsoftcanada.com/showthread.php?t=157657

[Kos-Mos]

I bet you can install a Madbull CO2 steel valve in there no problem.

They are sold in 3-packs, so you will have spares.

[Heerven]

Thanks Jordan! Good ideas!

@Kosmos I have a madbull CO2 grenade and the fill valve is the same size as the one with white O-ring. Too small