Anyone recognize this fet?

Spike · September 9th, 2014, 18:27

I got this in an old gun... I don't recognize the fet. It doesn't seem to like 3S lipos very much, it'll beep at me after a quick burst in auto and shut off.

Maethori · September 9th, 2014, 18:42

In my semi-informed opinion, I would guess that it's an ASCU ver.1 with it's heat-shrink wrapping missing.

ccyg8774 · September 9th, 2014, 19:03

The looking of the unit, the small ribbon cable, and the white jump wire on the circuit board really look like an ASCU. Would you mind show the other side of the unit as well?

Quote:

Originally Posted by Spike

I got this in an old gun... I don't recognize the fet. It doesn't seem to like 3S lipos very much, it'll beep at me after a quick burst in auto and shut off.

That sounds like what an ASCU will do when it detects a large current, in case of a short, or a stuck motor, or just when the normal current draw is larger than the ASCU would expect, and the ASCU thinks there is a short or a stuck motor (but actually not).
Then the ASCU will beep twice, shut off till the battery get unpluged and pluged again.

Spike · September 9th, 2014, 19:08

ccyg8774 · September 9th, 2014, 19:24

I think this is a ASCU.
I am not familar with the versions and generations of ASCU, but this looks like the one I got. With this version, the ribbon cable is attached to the sensor unit circuit board directly, rather than using a white connector. It is also attached to the control unit via a large black connector, rather than a small white connector. There is also a white jump wire on the circuit board (under the heat shrink wrap).

(Web picture)
Different from this one but both used in Version 2 gearbox.

(Web picture)

Update: I found it, the one using large black connector/no connector is just ASCU 1 for Version 2, and the one using small white connector (on both side of the ribbon cable) is ASCU II for Version 2.
http://www.airsoftsystems.com/downlo...-manual-EN.pdf
http://www.airsoftsystems.com/downlo...-II-manual.pdf

The way they name them is confusing, one is called either "ASCU" or "ASCU 1", the other called either "ASCU II" or "ASCU for gearbox Version 2", but they are both for version 2 gearbox. Just to make it more confusing, there is also something else called "ASCU 2" ...
Check the link, the PDF covers and the PDF file names...
http://www.airsoftsystems.com/?id=11

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 9th, 2014, 18:27	#1
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Anyone recognize this fet? I got this in an old gun... I don't recognize the fet. It doesn't seem to like 3S lipos very much, it'll beep at me after a quick burst in auto and shut off. __________________ I change primaries like other people change socks.

September 9th, 2014, 18:42	#2
Maethori Trader rating Join Date: Sep 2009 Location: Burlington, Ontario	In my semi-informed opinion, I would guess that it's an ASCU ver.1 with it's heat-shrink wrapping missing. __________________ BRAVO 2-7 Danger Close D43

September 9th, 2014, 19:08	#4
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	__________________ I change primaries like other people change socks.

September 9th, 2014, 19:24	#5
ccyg8774 Trader rating Join Date: Jun 2012 Location: Brampton, ON	I think this is a ASCU. I am not familar with the versions and generations of ASCU, but this looks like the one I got. With this version, the ribbon cable is attached to the sensor unit circuit board directly, rather than using a white connector. It is also attached to the control unit via a large black connector, rather than a small white connector. There is also a white jump wire on the circuit board (under the heat shrink wrap). (Web picture) Different from this one but both used in Version 2 gearbox. (Web picture) Update: I found it, the one using large black connector/no connector is just ASCU 1 for Version 2, and the one using small white connector (on both side of the ribbon cable) is ASCU II for Version 2. http://www.airsoftsystems.com/downlo...-manual-EN.pdf http://www.airsoftsystems.com/downlo...-II-manual.pdf The way they name them is confusing, one is called either "ASCU" or "ASCU 1", the other called either "ASCU II" or "ASCU for gearbox Version 2", but they are both for version 2 gearbox. Just to make it more confusing, there is also something else called "ASCU 2" ... Check the link, the PDF covers and the PDF file names... http://www.airsoftsystems.com/?id=11 __________________ Last edited by ccyg8774; September 9th, 2014 at 19:48..

Anyone recognize this fet?

Upgrades & Modifications