|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 9th, 2014, 20:52
|
#1 |
|
Whiny Attention Whore
|
VSR10 Spring In L96AWS?
I was told I can do this by cutting the VSR spring, Is this true?
Also What is the recommended length spring for a L96 AWS(MB4401) Thanks for any help.
__________________
B.A. Level 3 Cert. |
|
|
|
October 9th, 2014, 21:10
|
#2 | |
|
Roughly 1" shorter.
But you need a chrony to find the correct length. Cut until you get the correct FPS + 15, then heat-up 1 full coil red and push the spring against a hard surface (wood or metal).
__________________
Quote:
|
|
|
|
|
|
October 9th, 2014, 22:37
|
#3 |
|
How much sand CAN you fit in your vagina!?
|
Also, I believe only 11mm (or 13mm), or bigger will fit. I bought two different VSR springs that would not fit over the spring guide. They were 9mm PDI and/or Laylax I believe.
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection... |
|
|
|
|
October 10th, 2014, 06:42
|
#4 |
|
Whiny Attention Whore
|
Great info, Thanks guys.
__________________
B.A. Level 3 Cert. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
