|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 18th, 2015, 13:57
|
#1 |
|
HK ARES G36c
So i recently bought an HK ARES G36c and thought id upgrade the spring motor and barrel. Spring was easy quick swap, motor i havent touched yet because im stuck with the barrel. I pulled the assembly out and went to remove the clip off the hopup and literally cracked into 4 peices with minimal pressure. So long story short i need to get a new hopup assembly. Only problem is ive been looking for a replacement but havent found a compatible hopup for ares. I beed some help guys, if any of you know any compatible hopups and that are full metal that would be great, if i dont have to use a plastic assembly i wont. Thanks.
|
|
|
|
January 18th, 2015, 22:00
|
#2 |
|
I would suggest trying a Prowin G36 metal hop up or an Ace1 Parts. I have had several G36 rifles installed with the Prowin. If not, I do have stock Ares hop ups available at my shop. Try www.niagaraquartermaster.com.
__________________
Je fais le guerre |
|
|
|
|
January 19th, 2015, 11:48
|
#3 |
|
"bb bukakke" KING!
|
prowin, ace1 or shs red aluminum (one is a clone of the other) . I should note though I've also had issues with the prowin but in CA guns.
I've had issues with the lonex unit, the plastic shs replacement and ares oem are junk, they work if they don't shatter to pieces in your hands.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
|
January 19th, 2015, 12:35
|
#4 |
|
|
Yeah I was literally removing the clip to install the new barrel and it broke into pieces in my hand, I just ordered a g36 hopup replacement from mach1airsoft looks about the same, if anything I can just use the clip from the new assembly. But im deffinently looking into getting a full metal hopup.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
