|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 24th, 2016, 17:56
|
#1 |
|
formerly Qc_Sarado
|
Fitting PTW RAS on AEG
Is it possible to install a PTW RAS on my ARES SR-25 (AEG thread)
I want to buy a Dytac URX III extend, but I cant find any AEG version in stock, only PTW... I'd like to know if there is a way to fit the imperial thread (PTW) on a metric reveiver? The PTW is 1 1/4" / 18 http://www.dytac.hk/index.php?route=...&product_id=84 ANd I need the AEG version M31.8 / P1.5 http://www.dytac.hk/index.php?route=...&product_id=83
__________________
Certified Level 2 BA Sniper Anciennement Qc_Sarado |
|
|
|
February 24th, 2016, 19:08
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Either switch to a G&P SR25, or buy a metric thread file. The pitch on the thread is close enough that you can just file it to match without removing too much material
|
|
|
|
|
February 26th, 2016, 18:18
|
#3 |
|
formerly Qc_Sarado
|
If I do that, can I go back on AEG RAS if I cahnge my mind ?
__________________
Certified Level 2 BA Sniper Anciennement Qc_Sarado |
|
|
|
|
February 26th, 2016, 18:44
|
#4 | |
|
That rail kinda sucks...
I also have a ARES XM110. And you can "force" imperial threads on there because the receiver tollerances are really loose. I have a 16" Noveske keymod on mine.
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
