Changing loading nozzle

Sekester · November 29th, 2005, 14:32

Alright guys
im replacing my hicapa(wei-tech)stock loading nozzle with a garder enhanced loading nozzle. I want to know before starting on how i should proceed and watch for, when doing this mod.

Reason for changing loading nozzle: the loading arm is bented and worn off witch cause problem with tm mags. I probably dry fired it to much :banghead:

Jugglez · November 29th, 2005, 15:09

Watch out for springs flying all over the place.

If it's anything like the TM, the cylinder return spring will fall right out. Get the owner's manual in front of you for reference, and do things slowly... if in doubt stop and refer to the manual for assitance or just ask here. Good luck :tup:

Sekester · November 29th, 2005, 15:33

Thanks dude

Sekester · November 30th, 2005, 13:36

alright its done and fits perflectly, but now theirs another problem;when i fired, the slide did not came back all the way and gas continued to come out of the mags, i think i could be cause by the piston witch i think i disadjusted a bit. Does the piston have to be screwed completly?

SEALs · November 30th, 2005, 16:34

Had the same problem with my P226 couldnt fix so I just kept my stock loading nozzle

bronney · January 10th, 2006, 04:16

I don't have a WE or Marui so don't exactly know. But in the WA's, you can try difference o-ring thickness. Perhaps after your upgrade, the nozzles's too tight or leaking gas. O-ring's an artform!

Toel · April 22nd, 2006, 18:40

talking about that, does anybody know where to get a TM Hi Capa 5.1 Reload Muzzle spring? and the Metal Cylinder that surrounds the whole Reload Muzzle? both theese parts got broken when i used Abbey Ultra on my standard HI Capa, so now im gonna totally upgrade it, but i need to find out where to get Muzzle Reload return spring and the Metal Cylinder. Im totally desperate, I don`t wanna give up on my TM Hi Capa 5.1!!

Cheers!

Toel

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 29th, 2005, 14:32	#1
Sekester Trader rating Join Date: Jun 2005 Location: Quebec	Changing loading nozzle Alright guys im replacing my hicapa(wei-tech)stock loading nozzle with a garder enhanced loading nozzle. I want to know before starting on how i should proceed and watch for, when doing this mod. Reason for changing loading nozzle: the loading arm is bented and worn off witch cause problem with tm mags. I probably dry fired it to much :banghead: __________________ Si vis pacem para bellum Death by Azzociation www.contractkillerz.com

November 29th, 2005, 15:09	#2
Jugglez Trader rating Join Date: Feb 2005 Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401	Watch out for springs flying all over the place. If it's anything like the TM, the cylinder return spring will fall right out. Get the owner's manual in front of you for reference, and do things slowly... if in doubt stop and refer to the manual for assitance or just ask here. Good luck :tup: __________________

November 29th, 2005, 15:33	#3
Sekester Trader rating Join Date: Jun 2005 Location: Quebec	Thanks dude __________________ Si vis pacem para bellum Death by Azzociation www.contractkillerz.com

November 30th, 2005, 13:36	#4
Sekester Trader rating Join Date: Jun 2005 Location: Quebec	alright its done and fits perflectly, but now theirs another problem;when i fired, the slide did not came back all the way and gas continued to come out of the mags, i think i could be cause by the piston witch i think i disadjusted a bit. Does the piston have to be screwed completly? __________________ Si vis pacem para bellum Death by Azzociation www.contractkillerz.com

November 30th, 2005, 16:34	#5
SEALs Trader rating Join Date: Dec 2001 Location: Watchin' your 6.	Had the same problem with my P226 couldnt fix so I just kept my stock loading nozzle __________________ If you're short of everything except enemies, you're in combat. D.O.W. SEALs Father of fear, reckless and widowmaker

January 10th, 2006, 04:16	#6
bronney Trader rating Join Date: Feb 2005 Location: Hong Kong	I don't have a WE or Marui so don't exactly know. But in the WA's, you can try difference o-ring thickness. Perhaps after your upgrade, the nozzles's too tight or leaking gas. O-ring's an artform! __________________

April 22nd, 2006, 18:40	#7
Toel Trader rating Join Date: Apr 2006 Location: Norway	talking about that, does anybody know where to get a TM Hi Capa 5.1 Reload Muzzle spring? and the Metal Cylinder that surrounds the whole Reload Muzzle? both theese parts got broken when i used Abbey Ultra on my standard HI Capa, so now im gonna totally upgrade it, but i need to find out where to get Muzzle Reload return spring and the Metal Cylinder. Im totally desperate, I don`t wanna give up on my TM Hi Capa 5.1!! Cheers! Toel

Changing loading nozzle

Upgrades & Modifications