Kriss Vector MOSFET upgrade

[SuperHog]

Such an upgrade available yet for the Kriss Vector AEG gen2? It could really use one.

[Styrak]

You could put in any mosfet you wanted provided it will fit, no?

[ThunderCactus]

...it already has a mosfet
You mean a BETTER mosfet?

[SuperHog]

It definitely needs a better MOSFET.

[ThunderCactus]

Is there any room to stuff a simple FET in there?
Why do you say it needs a better FET? What's the build you're trying to make?

[SuperHog]

Originally Posted by ThunderCactus

Is there any room to stuff a simple FET in there?
Why do you say it needs a better FET? What's the build you're trying to make?

The stock MOSFET does not make a full cycle if you don't hold the trigger down slightly longer than other MOSFETs. If you tap the trigger, a partial cycle occurs. It is a known problem on these KV's. I think aftermarket companies will a opportunity to fix it.

If you see someone with a KV gen2, give it a try. You will see how bad it is.

[ThunderCactus]

That's not a mosfet issue, it's a logic issue.
No mosfet does cycle completion unless it either monitors the sector gear, or has a minimum time cycle.
You could minimize the issue by decreasing the cycle time though!