MP5 Small peice on stock

GMTII · March 15th, 2006, 02:57

1

Graham · March 15th, 2006, 02:59

when I took the stock of my TM mp5, one of the same fall out

i have yet to put it back in, and it's workin fine

buzzard · March 15th, 2006, 09:50

you guys have a slither stock right? if so that is the spring that keeps the little piece of plastic in place; the piece that holds the stock from sliding all the way off when you slide it out. i found a shop (takedown) manual for the mp5 somewhere on these forums, and it was shown in a little diagram; maybe there is a part number

yanhchan · March 15th, 2006, 09:57

I painted mine flourcent orange with some glow in the dark spray...! neat little trick to keep from losing it completely...For the V shaped one you should be able to make it using the same metal the battery holders use in flashlights or something like that...they're flexable and easy to shape

CDN_Stalker · March 15th, 2006, 10:09

Buzzard pretty much has it. Don't just keep the stock from falling out, but also latches the stock in it's three positions. Not overly sure if it's important or not, but I made a point of not losing mine.

GMTII · March 15th, 2006, 13:49

1

Graham · March 15th, 2006, 13:54

ohhh good find Erik, now I know where the small plastic piece that was floating about in my box came from!

CDN_Stalker · March 15th, 2006, 14:05

There really are only two pieces in there, on the right side anyways. The little black thing is the latch, the V shaped thing behind it is the spring.

GMTII · March 15th, 2006, 14:29

1

CDN_Stalker · March 15th, 2006, 14:36

Easiest would be to take a look at the manual you posted for orientation. See the way the metal peice's bevels are oriented in relation to the pins on the side? Also, notice that one side of the spring is longer than the other.Just place them together in the gun like that, and slide the cap on. Also pay attention to the sling loop, it only fits in there one way.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 15th, 2006, 02:57	#1
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	MP5 Small peice on stock 1 __________________ I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 20th, 2012 at 16:54..

March 15th, 2006, 02:59	#2
Graham Trader rating Join Date: Apr 2003 Location: Alberta	when I took the stock of my TM mp5, one of the same fall out i have yet to put it back in, and it's workin fine __________________ R.A.A.T *http://www.historicalairsoftalberta.ca/*

March 15th, 2006, 09:50	#3
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	you guys have a slither stock right? if so that is the spring that keeps the little piece of plastic in place; the piece that holds the stock from sliding all the way off when you slide it out. i found a shop (takedown) manual for the mp5 somewhere on these forums, and it was shown in a little diagram; maybe there is a part number __________________ aka beefhole proud Labradorian

March 15th, 2006, 09:57	#4
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	I painted mine flourcent orange with some glow in the dark spray...! neat little trick to keep from losing it completely...For the V shaped one you should be able to make it using the same metal the battery holders use in flashlights or something like that...they're flexable and easy to shape __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

March 15th, 2006, 10:09	#5
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Buzzard pretty much has it. Don't just keep the stock from falling out, but also latches the stock in it's three positions. Not overly sure if it's important or not, but I made a point of not losing mine. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 15th, 2006, 13:49	#6
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	1 __________________ I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 20th, 2012 at 16:55..

March 15th, 2006, 13:54	#7
Graham Trader rating Join Date: Apr 2003 Location: Alberta	ohhh good find Erik, now I know where the small plastic piece that was floating about in my box came from! __________________ R.A.A.T *http://www.historicalairsoftalberta.ca/*

March 15th, 2006, 14:05	#8
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	There really are only two pieces in there, on the right side anyways. The little black thing is the latch, the V shaped thing behind it is the spring. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 15th, 2006, 14:29	#9
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	1 __________________ I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 20th, 2012 at 16:55..

March 15th, 2006, 14:36	#10
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Easiest would be to take a look at the manual you posted for orientation. See the way the metal peice's bevels are oriented in relation to the pins on the side? Also, notice that one side of the spring is longer than the other.Just place them together in the gun like that, and slide the cap on. Also pay attention to the sling loop, it only fits in there one way. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

MP5 Small peice on stock

Doctor's Corner