buiding my own gun having problems.

AirsoftTechGeek · April 8th, 2006, 19:20

:salute: :hammer: I have been trying to figure out how the trigger assembly and cut-off lever work can inyone tell me/ give me a diagram.

I have been trying to build my own airsoft gun from the parts of others and i am having some problems. I would really like to be able to switch between semi-auto and auto but i can't get the wiring and trigger assembly to work right. any ideas?

I am using a TM V2 Mechbox that has most of the right parts, outside of that i've done pretty well with just mixing and matching parts.
I was trying toupgrade the wiring to incorporate for a better motor, when i screwd up the trigger assembly.
I treid to fix it mysef and now it's completely taken apart.

I was looking at airsoftretreat.com where i found an article about taking apart mechboxes(to try to fix it) which specificly warned me not to take apart the trigger assembly on a V2 mechbox.
http://www.airsoftretreat.com/featu.../mechbox_guide/

It's a new Tokyo Marui MP7A1. The trigger assembly is in quite a few pieces but i know i have all of them.

Does anyone just have, or know were i can get a diagram or something that shows how to put a trigger assembly together/how it works. doesn't even have to be for the right mechbox, just so i can get an idea. :hammer: :snipe:

AirsoftTechGeek · April 8th, 2006, 20:09

I recently bought a brand new desert eagle blowback pistol off ebay and am wondering what upgrades i should try.

Pvt.Snowball · April 8th, 2006, 23:59

Look airsoft sites, there may be high end valve upgrades for it. Metal slides for Desert eagle, if there is any, are probably real pricey. Have a look around websites like www.wgcshop.com or www.redwolfairsoft.com. They should have something for the desert Eagle.

Took some time to help you out, here is a reinforced hammer for your Deagle http://www.wgcshop.com/WGC_Shop/images/km_tm021de.jpg
It is made buy KM

KM stainless valve knocker
http://www.wgcshop.com/WGC_Shop/images/km_tm08den.jpg

Guarder enhanced feeding muzzle
http://www.wgcshop.com/WGC_Shop/images/gd_pt_mu04.jpg

Nine Ball ahmmer spring
http://www.wgcshop.com/WGC_Shop/images/nb_pt_dehs.jpg

Proud enhanced recoil spring
http://www.wgcshop.com/WGC_Shop/imag..._acc_pis18.jpg

Zeke metal Frame *it is paint white due to japanese gun bans, you will need paint remover to get the metal color*
http://www.wgcshop.com/WGC_Shop/imag...sl_tmde5mf.jpg

Zeke Metal Slide
http://www.wgcshop.com/WGC_Shop/imag...sl_tmde5ms.jpg

I just searched WGCshop for all this, theyhave lots of goodies for your Desert eagle, these are njust some slected few i found. Just type in Desert Eagle in the wuick search, it will pop up pretty much everything for Tm and Digicon Desert Eagles.

AirsoftTechGeek · April 9th, 2006, 01:00

Thanks

AirsoftTechGeek · April 9th, 2006, 01:06

I have been trying to build my own airsoft gun from the parts of others and i am having some problems. I would really like to be able to switch between semi-auto and auto but i can't get the wiring and trigger assembly to work right. any ideas? :hammer:

I am using a TM V2 Mechbox that has most of the right parts, outside of that i've done pretty well with just mixing and matching parts.
I was trying toupgrade the wiring to incorporate for a better motor, when i screwd up the trigger assembly.
I treid to fix it mysef and now it's completely taken apart.

I was looking at airsoftretreat.com where i found an article about taking apart mechboxes(to try to fix it) which specificly warned me not to take apart the trigger assembly on a V2 mechbox.
http://www.airsoftretreat.com/featu.../mechbox_guide/

AirsoftTechGeek · April 9th, 2006, 01:20

I took apart the trigger assemblies on a couple of my guns, as a pat of trying to build my own gun, the only problem is i can't get them back together. Any Ideas? :???:

Cortexburn · April 9th, 2006, 01:23

Can you provide more detail on the guns? How are they not going back together? 100% sure you've all the parts?

Pvt.Snowball · April 9th, 2006, 01:39

no problem.

^Hyperion^ · April 9th, 2006, 01:40

you could just post in the Doctor's Corner. Maybe some will think you're an idiot trying to make an AEG from nuts but hey , I think it takes a lot of guts to put money in a project like that so I can't blame you for trying :salute:

AirsoftTechGeek · April 9th, 2006, 01:47

It's a new Tokyo Marui MP7A1. it's in quite a few pieces but i know i have all of them

AirsoftTechGeek · April 9th, 2006, 01:51

I'll try that.

AirsoftTechGeek · April 9th, 2006, 01:58

Building an aeg from nuts and bults because i don't wan't to destroy any of my existing guns and end up with half a gun laying around somewhere.

AirsoftTechGeek · April 9th, 2006, 02:10

I want to put some better wire in my guns what kind of wire should i get and were do i get it

AirsoftTechGeek · April 9th, 2006, 02:11

If anyone else has any ideas please respond

mcguyver · April 9th, 2006, 02:31

You'll need to give a hell of alot more info if you need help. It's like saying "I'm trying to build a car from parts, HELP". Nobody knows what exactly you're doing, what problems you're encountering and what you need to do to fix it up right.

Just be very specific when you post here, or you won't get the help you need.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 8th, 2006, 19:20	#1
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	buiding my own gun having problems. :salute: :hammer: I have been trying to figure out how the trigger assembly and cut-off lever work can inyone tell me/ give me a diagram. I have been trying to build my own airsoft gun from the parts of others and i am having some problems. I would really like to be able to switch between semi-auto and auto but i can't get the wiring and trigger assembly to work right. any ideas? I am using a TM V2 Mechbox that has most of the right parts, outside of that i've done pretty well with just mixing and matching parts. I was trying toupgrade the wiring to incorporate for a better motor, when i screwd up the trigger assembly. I treid to fix it mysef and now it's completely taken apart. I was looking at airsoftretreat.com where i found an article about taking apart mechboxes(to try to fix it) which specificly warned me not to take apart the trigger assembly on a V2 mechbox. http://www.airsoftretreat.com/featu.../mechbox_guide/ It's a new Tokyo Marui MP7A1. The trigger assembly is in quite a few pieces but i know i have all of them. Does anyone just have, or know were i can get a diagram or something that shows how to put a trigger assembly together/how it works. doesn't even have to be for the right mechbox, just so i can get an idea. :hammer: :snipe:

April 8th, 2006, 20:09	#2
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	desert eagle blowback pistol; upgrades I recently bought a brand new desert eagle blowback pistol off ebay and am wondering what upgrades i should try.

April 8th, 2006, 23:59	#3
Pvt.Snowball Trader rating Join Date: Mar 2006 Location: mexico, with cheech	Look airsoft sites, there may be high end valve upgrades for it. Metal slides for Desert eagle, if there is any, are probably real pricey. Have a look around websites like www.wgcshop.com or www.redwolfairsoft.com. They should have something for the desert Eagle. Took some time to help you out, here is a reinforced hammer for your Deagle http://www.wgcshop.com/WGC_Shop/images/km_tm021de.jpg It is made buy KM KM stainless valve knocker http://www.wgcshop.com/WGC_Shop/images/km_tm08den.jpg Guarder enhanced feeding muzzle http://www.wgcshop.com/WGC_Shop/images/gd_pt_mu04.jpg Nine Ball ahmmer spring http://www.wgcshop.com/WGC_Shop/images/nb_pt_dehs.jpg Proud enhanced recoil spring http://www.wgcshop.com/WGC_Shop/imag..._acc_pis18.jpg Zeke metal Frame it is paint white due to japanese gun bans, you will need paint remover to get the metal color http://www.wgcshop.com/WGC_Shop/imag...sl_tmde5mf.jpg Zeke Metal Slide http://www.wgcshop.com/WGC_Shop/imag...sl_tmde5ms.jpg I just searched WGCshop for all this, theyhave lots of goodies for your Desert eagle, these are njust some slected few i found. Just type in Desert Eagle in the wuick search, it will pop up pretty much everything for Tm and Digicon Desert Eagles. __________________

April 9th, 2006, 01:00	#4
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	Thanks

April 9th, 2006, 01:06	#5
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	Buildin my own airsoft gun; having problems I have been trying to build my own airsoft gun from the parts of others and i am having some problems. I would really like to be able to switch between semi-auto and auto but i can't get the wiring and trigger assembly to work right. any ideas? :hammer: I am using a TM V2 Mechbox that has most of the right parts, outside of that i've done pretty well with just mixing and matching parts. I was trying toupgrade the wiring to incorporate for a better motor, when i screwd up the trigger assembly. I treid to fix it mysef and now it's completely taken apart. I was looking at airsoftretreat.com where i found an article about taking apart mechboxes(to try to fix it) which specificly warned me not to take apart the trigger assembly on a V2 mechbox. http://www.airsoftretreat.com/featu.../mechbox_guide/

April 9th, 2006, 01:20	#6
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	Trigger assembly took it apart cant get it back together I took apart the trigger assemblies on a couple of my guns, as a pat of trying to build my own gun, the only problem is i can't get them back together. Any Ideas? :???:

April 9th, 2006, 01:23	#7
Cortexburn Miserable Bastard Trader rating Join Date: Nov 2000 Location: Red Deer, Alberta	Can you provide more detail on the guns? How are they not going back together? 100% sure you've all the parts? __________________ My Buy/Sell Rating. “We cannot defend freedom abroad by deserting it at home.” Thomas Jefferson I hate Ghillie suits. Socialism SUCKS www.unisevil.com

April 9th, 2006, 01:39	#8
Pvt.Snowball Trader rating Join Date: Mar 2006 Location: mexico, with cheech	no problem. __________________

April 9th, 2006, 01:40	#9
^Hyperion^ Trader rating Join Date: Jan 2006 Location: Montreal , Quebec	you could just post in the Doctor's Corner. Maybe some will think you're an idiot trying to make an AEG from nuts but hey , I think it takes a lot of guts to put money in a project like that so I can't blame you for trying :salute: __________________

April 9th, 2006, 01:47	#10
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	It's a new Tokyo Marui MP7A1. it's in quite a few pieces but i know i have all of them

April 9th, 2006, 01:51	#11
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	I'll try that.

April 9th, 2006, 01:58	#12
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	Building an aeg from nuts and bults because i don't wan't to destroy any of my existing guns and end up with half a gun laying around somewhere.

April 9th, 2006, 02:10	#13
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	Were can you get better wire to upgrade your guns I want to put some better wire in my guns what kind of wire should i get and were do i get it

April 9th, 2006, 02:11	#14
AirsoftTechGeek Banned Trader rating Join Date: Apr 2006 Location: Minnesota, US	If anyone else has any ideas please respond

April 9th, 2006, 02:31	#15
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	You'll need to give a hell of alot more info if you need help. It's like saying "I'm trying to build a car from parts, HELP". Nobody knows what exactly you're doing, what problems you're encountering and what you need to do to fix it up right. Just be very specific when you post here, or you won't get the help you need. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

buiding my own gun having problems.

Upgrades & Modifications