|
|
December 28th, 2022, 13:57
|
#1 |
|
Revolver set up for IPSC Actionair competition
 Top: Umarex M29 8? with 3D print extended cylinder release Bottom: ASG715 4? with red dot sight, tall front sight, 3D print grip butt Speed holsters: Double Alpha, GR & Ghost Moon clip shells: Umarex shell with Wilson Combat.45 ACP moon clip. ASG moon clip set custom with TKcustom moon cip, Gun Heaven rear loaded shell with TKcustom moon clip, CL Project moon clip set Both are moon clip compatible with holster, hammerspur removed, tuned smooth for reloading, trigger pulling and cylinder lock too. More on going projects coming?.. As the IPSC Actionair revolver division is coming up, and I haven?t posted much here for years, as some of you may know me, I like shells, shell eject shotgun and shell revolver, now may share some of my set up for revolver. If you guys are interested in it, I may post more in the future, thanks for reading!      Stippling the grips to make ot a better grap             My very first airsoft WG revolver customized with home made moon clips in 10 years ago 
__________________
aka Uncle 
Last edited by N_Force; June 10th, 2024 at 00:04.. |
|
|
|
January 4th, 2023, 16:14
|
#2 |
|
|
 Umarex M629 classic 5?  Umarex S&W M&P R8  BO Chiappa Rhino 3?  ASG715  Umarex M29 with optic installed
__________________
aka Uncle
Last edited by N_Force; June 13th, 2024 at 13:26.. |
|
|
|
|
January 4th, 2023, 16:19
|
#3 |
|
|
__________________
aka Uncle
Last edited by N_Force; March 20th, 2023 at 15:14.. |
|
|
|
|
January 27th, 2023, 08:40
|
#4 |
|
Awesome N!
__________________
M4 MK12 MOD0, SBR, KC02 G17 (B. A. Level 2 Cert.) |
|
|
|
|
February 26th, 2023, 13:41
|
#5 |
|
|
 
__________________
aka Uncle
|
|
|
|
|
February 27th, 2023, 09:21
|
#6 |
|
I'm curious as to which airsoft revolvers are actually durable enough to use for IPSC. A lot of plastic out there that I don't think can take the wear & tear. A starter's guide would probably be good if anybody has the time to put one together.
|
|
|
|
|
March 20th, 2023, 14:45
|
#7 | |
|
|
Quote:
All the Japanese revolver models are plastic, they wear quick and last for hundreds shots and having troubles mostly, no good for gaming at all, i had them for collections only, but the Taiwan made full metal models, alot better. Let?s say my ASG 715, I have 5 pcs for my collection, but the one i use for actionair practical shooting, been 5-6 years and put through more than 5000 rds, it?s still running good(you have to keep it in good maintained), but moon clip compatible models is only ASG 715 by manufacturer, Rhino one is after market and Umarex M29 is my custom made, Umarex R8 you can get moon clip and custom make it too, so pick whatever available in the market you should be good for some double action shell reloading fun! PS, if you want to experience them, you may come visit us at Practical Shooter Corner in Markham, I’m there in most of the Friday evening.
__________________
aka Uncle
Last edited by N_Force; March 22nd, 2023 at 09:05.. |
|
|
|
|
|
March 20th, 2023, 14:56
|
#8 |
|
|
Customized hand grip to fit for my personal preference, and DIY cylinder release for umarex M29 is added right beside the hammer, also keeping the original one, this release is even better than the extended one, particularly good for shooter like me with a smaller palm or shorter thumb, love it!
   Top is DIY cylinder release with original, bottom is 3D print extended releases
__________________
aka Uncle
|
|
|
|
|
March 20th, 2023, 15:09
|
#9 |
|
|
Reload practice video
__________________
aka Uncle
Last edited by N_Force; March 22nd, 2023 at 20:59.. |
|
|
|
|
March 22nd, 2023, 18:12
|
#10 |
|
|
Speed Holsters
Three different revolver speed holsters:
Double Alpha (Left): ASG715 and Umarex M29/629 GR (middle): universal Ghost (right): light modified to fit ASG715 and Umarex M29/629  This one fits WG revolver 
__________________
aka Uncle
Last edited by N_Force; March 22nd, 2023 at 20:59.. |
|
|
|
|
March 23rd, 2023, 11:40
|
#11 |
|
|
My very first DIY moon clip for WG revolver 10 years ago
WG revolver with DIY moon clips and leather holster , the moon clip was using gasket maker to glue together, but sooner someone copied this idea and 3D print them. And this moon clip design, the revolver needs no modified, just drops in and shoots.
   
__________________
aka Uncle
Last edited by N_Force; March 23rd, 2023 at 13:12.. |
|
|
|
|
March 24th, 2023, 12:21
|
#12 |
|
|
My second ASG715 revolver set up within these couple years
This is ASG715 full metal revolver, pretty strong build and nice finishing, only the cylinder release is not like the real one, design on the right side in front of cylinder, yiu have to use the left hand pulling it down to release cylinder.
This model has CL Projects in Taiwan supporting upgraded parts for competition set up. Dump pouch for collecting moon clips to avoid damaged when drop on floor, this customize moon clips are more durable, even drop on floor would not too easy to damage them, may just spme shell falls apart only. Red dot sight install (not for IPSC Revolver division) Raise front sight for easy locate red dot 3D print hand grip base Tuned smooth for trigger pull and cylinder rotation, also modified cylinder for metal moon clip compatible  Modified original plastic moon clip with TK Custom Rhino metal moon clip for stronger support and more durable 
__________________
aka Uncle
Last edited by N_Force; March 24th, 2023 at 18:58.. |
|
|
|
|
March 24th, 2023, 12:43
|
#13 |
|
|
My third Umarex M29 revolver set up
This is Umarex M29 8 inches model, I would rather to have 5 inches for easier handling. This model is exactly like the real one, cylinder is larger than ASG715, release is behind cylinder and under the hammer on left .
This one also tuned for smoother trigger pull and reload, hand grip is customized for personal palm size This .45 ACP moon clip is not good for airsoft shells, as the shells are too heavy, if drop on the floor could cause damaged or deformed, then will have problems for reloading, needs to be repaired and re-do it, so collect by dump pouch is necessary! Double Alpha belt and holster system, DIY moon clip pouches  Mill the shells to install .45 ACP moon clips, DIY add extra cylinder release beside hammer for easier release  Mill the cylinder for moon clip compatible  Add Dead Ranger rear sight for easy aiming
__________________
aka Uncle
Last edited by N_Force; March 24th, 2023 at 19:01.. |
|
|
|
|
May 8th, 2023, 12:45
|
#14 |
|
|
 I?m so glad that this revolver set up is about to be finalized, after taking quite a long time for experimenting! Tuned smooth internals and replaced some springs. Custom hand grip for better griping and cylinder releases for a quick thumb push. Add rear ring sights and front fibre sight for easier aiming. Modified moon clips more durable and flexible that taking impact when drop on ground, not easy yo be off shape and got jam. Shells are tuned for accuracy and light modified for smoother rotation when in cylinder. Moon clip holders angle adjust for my personal preference. Dump pouch set on side under revolver rather than in front to collect shells after used. Now it?s time getting back to basic and keep practicing?.. If anyone interested to join Actionair Revolver Division, pls contact me, looking forward to hear from you soon!
__________________
aka Uncle
|
|
|
|
|
May 14th, 2023, 20:16
|
#15 |
|
|
Reinforce moon clip
__________________
aka Uncle
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
