EBB repairs.

Taillo · June 13th, 2006, 10:48

Hi, i have a TM Combat Delta EBB. Yeah i know its crap. But i like it anyway. Lately, i accidently inserted a bb with a slight moldling deformation, and it got stuck inside, after cleaning with the rod, there was something wrong, the Popup system had moved and the gun was jammed completely.

In an older thread, a guy was talking about opening his TM m92fs EBB, he never got it to work correctly after. I decided to give it a try anyway, because i had nothing to lose.

The pop up rubber ring was turned 90 degrees so i fitted it back into its place and re assembled the gun. Result: The slide lost 90% of its original blowback movement, moving like 5 mm at each shot. The guy with the 92fs had the same problem.

this weekend, i found my combat delta in the bottom of a drawer, and i decided to give it a try. So i reopened it and tried to repair it, and it worked, the slide now blowbacks as original and with a little bit of glue, the hop up system hold tight into its place.

So if someone want to repair it or get rid of their broken EBB, im willing to give it a try.

Renegade) · June 13th, 2006, 12:32

Wrong section, should be in Doctors Corner, but really, I say you forget about it and buy a GBB, oh and never ever put a deformed bb in your gun again.

Taillo · June 13th, 2006, 12:51

My interrest in EBB is for cinematic use only. Do you really inspect each bb you put in your gun when it comes from a high grade pack?

Sorry, i did not know about the doctor corner, is there a way to move the thread?

LUTNIT · June 13th, 2006, 13:23

The mods will move the thread when they see it.

If it was a high quality pack, it shouldnt have had deformed ones in it. Many of the manufacturers (if not all) claim to be top quality and its written on the package. You just have to know what is high quality and what isnt. I have some 0.12's from the UK that say "top competition grade" but are the most deformed pieces of crap I've ever seen.

Renegade) · June 13th, 2006, 14:07

I was going to make a similar answer to LUTNIT but I was late for work, hes right a Mod will move it later, as for now it sounds like you did some internal damage with that bb, you might have to take it appart of take it to a local gun doctor to help you find out what is damaged, what needs to be fixed, ect.

I had first thought you had been dumb enuf to reload a pre fired bb, but if it was from a new bag, the manufacture should be somewhat liable for having a bad bb in there.

Taillo · June 13th, 2006, 14:10

It is repaired, i posted this because im willing to buy broken ebbs or discuss with their owners to help them repair it. Personnaly i dont care if it does not shoot, im using them for teatrical purpose, if the slide blowbacks, im happy.
Sure, im looking for an AEG or GBB , but this is another story...

firemachine69 · June 13th, 2006, 15:15

Theatrical purposes?

*Puts on flame-retardent suit.*

Taillo · June 13th, 2006, 15:20

Its to make B action movies.

yanhchan · June 13th, 2006, 15:39

LOL POSTED IN THE WRONG PAGE SORRY

Skruface · June 13th, 2006, 17:03

Quote:

Originally Posted by Taillo

Its to make B action movies.

More like "F" action movies. I'm curious, what kind of budgets do your shoots have? Are you IATSE certified? Do you use only union labour?

I've worked in the industry....even "B"-grade movies generally have budgets in the single millions of dollars and employ a SPFX supervisor with a tech or two, a props supervisor with several techs working for him, and in most cases, a licensed armorer. If you truly were making *real* movies for cinematic release, you'd know the people I'm talking about, and would be directed by your AD to contact them to get the stuff you need.

Please don't call home movies or class projects "b-grade action movies". It's an insult to people who actually work in the movies. It's like joining the Sea Cadets and telling people you're in JTF2 (or, in your case, the Army Reserves).

Taillo · June 13th, 2006, 17:29

Sorry if you are so easily insulted, yeah its f movies, or maybe z movie, i dont really care, its INSPIRED by the B-Style movies, and some of the friends i work with had pretty good success in various local indie movie festivals, places that dont give a shit about mainstream syndicate.

Greylocks · June 13th, 2006, 18:14

I hope you have the right permits for props. If not, that can bite you real fast.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 13th, 2006, 10:48	#1
Taillo Trader rating Join Date: Mar 2004 Location: Mtl	EBB repairs. Hi, i have a TM Combat Delta EBB. Yeah i know its crap. But i like it anyway. Lately, i accidently inserted a bb with a slight moldling deformation, and it got stuck inside, after cleaning with the rod, there was something wrong, the Popup system had moved and the gun was jammed completely. In an older thread, a guy was talking about opening his TM m92fs EBB, he never got it to work correctly after. I decided to give it a try anyway, because i had nothing to lose. The pop up rubber ring was turned 90 degrees so i fitted it back into its place and re assembled the gun. Result: The slide lost 90% of its original blowback movement, moving like 5 mm at each shot. The guy with the 92fs had the same problem. this weekend, i found my combat delta in the bottom of a drawer, and i decided to give it a try. So i reopened it and tried to repair it, and it worked, the slide now blowbacks as original and with a little bit of glue, the hop up system hold tight into its place. So if someone want to repair it or get rid of their broken EBB, im willing to give it a try.

June 13th, 2006, 12:32	#2
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Wrong section, should be in Doctors Corner, but really, I say you forget about it and buy a GBB, oh and never ever put a deformed bb in your gun again. __________________ W1-5

June 13th, 2006, 14:07	#5
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	I was going to make a similar answer to LUTNIT but I was late for work, hes right a Mod will move it later, as for now it sounds like you did some internal damage with that bb, you might have to take it appart of take it to a local gun doctor to help you find out what is damaged, what needs to be fixed, ect. I had first thought you had been dumb enuf to reload a pre fired bb, but if it was from a new bag, the manufacture should be somewhat liable for having a bad bb in there. __________________ W1-5

June 13th, 2006, 12:51	#3
Taillo Trader rating Join Date: Mar 2004 Location: Mtl	My interrest in EBB is for cinematic use only. Do you really inspect each bb you put in your gun when it comes from a high grade pack? Sorry, i did not know about the doctor corner, is there a way to move the thread?

June 13th, 2006, 13:23	#4
LUTNIT Trader rating Join Date: Dec 2005 Location: Ottawa	The mods will move the thread when they see it. If it was a high quality pack, it shouldnt have had deformed ones in it. Many of the manufacturers (if not all) claim to be top quality and its written on the package. You just have to know what is high quality and what isnt. I have some 0.12's from the UK that say "top competition grade" but are the most deformed pieces of crap I've ever seen.

June 13th, 2006, 14:10	#6
Taillo Trader rating Join Date: Mar 2004 Location: Mtl	It is repaired, i posted this because im willing to buy broken ebbs or discuss with their owners to help them repair it. Personnaly i dont care if it does not shoot, im using them for teatrical purpose, if the slide blowbacks, im happy. Sure, im looking for an AEG or GBB , but this is another story... __________________ Arsenal: Back to basics!!! TM springer m92fs military TM EBB Combat Delta UHC springer Desert Eagle .44 KWC springer m92fs Unknown Colt 1911A WELL 1911A 3/4 scale WELL m92fs 3/4 scale X 3 Softair Berreta M12 WELL AK-377 YES LAUGH, and help me get a real gun...

June 13th, 2006, 15:20	#8
Taillo Trader rating Join Date: Mar 2004 Location: Mtl	Its to make B action movies. __________________ Arsenal: Back to basics!!! TM springer m92fs military TM EBB Combat Delta UHC springer Desert Eagle .44 KWC springer m92fs Unknown Colt 1911A WELL 1911A 3/4 scale WELL m92fs 3/4 scale X 3 Softair Berreta M12 WELL AK-377 YES LAUGH, and help me get a real gun...

June 13th, 2006, 15:39	#9
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	LOL POSTED IN THE WRONG PAGE SORRY __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

June 13th, 2006, 17:29	#11
Taillo Trader rating Join Date: Mar 2004 Location: Mtl	Sorry if you are so easily insulted, yeah its f movies, or maybe z movie, i dont really care, its INSPIRED by the B-Style movies, and some of the friends i work with had pretty good success in various local indie movie festivals, places that dont give a shit about mainstream syndicate. __________________ Arsenal: Back to basics!!! TM springer m92fs military TM EBB Combat Delta UHC springer Desert Eagle .44 KWC springer m92fs Unknown Colt 1911A WELL 1911A 3/4 scale WELL m92fs 3/4 scale X 3 Softair Berreta M12 WELL AK-377 YES LAUGH, and help me get a real gun...

June 13th, 2006, 18:14	#12
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	I hope you have the right permits for props. If not, that can bite you real fast.

EBB repairs.

Airsoft Guns Discussion