My custom CA36

bloodkoala · January 21st, 2007, 20:59

Finally finished the sub-mods on my CA36 (after a madbull tightbore)
it, in effect, has a 9inch rail on the bottom that was designed for the m16, i cut it down and bolted it into place. it also has a small length g36 rail on top of the sight, as well as a V-type stock and some custom trademarks (i know they dont go there but it doesnt matter)

coments/sugestions are apreciated

Tankdude · January 21st, 2007, 21:07

nice. C&C rules

Boche · January 21st, 2007, 21:12

Quote:

Originally Posted by bloodkoala

coments/sugestions are apreciated

Clean up and paint over the saw marks on the rail.

takatorikku · January 21st, 2007, 21:20

the dual optics looks nice. mind sharing on how you accomplished it??? i've been meaning to do that to my K version

Krieg · January 21st, 2007, 21:21

Nice!

It seems like the red dot is too high.
Does it work out for you?
Because sometimes I have trouble in prone with the built-in scope.

Besides everything: gotta love the stock, nice g36

DuffMan · January 21st, 2007, 21:35

Slap an Eotech or Aimpoint on that rail. Civie optics make everything look amatuer.

KraziAzn · January 22nd, 2007, 00:28

NOD!

bloodkoala · January 22nd, 2007, 02:30

the rds is pretty simple to instal, all you need is a short g36 rail (the kind that are tippicaly mounted to the sides of G36c's) take one of those and sand (or saw) down one of the screw runs (the plastic nubs where the screw goes on the underside of the rail) then just allign it above the scope with the shortened end on top of the raised part of the carry handle, apply superglue and voila!

NOTE: with this applied, you cant adjust the sights elevation, doesnt matter to me because you cant use it with a paintball mask on anyway...

to mr.ptrap the rds is a little high, but the cheekrest + paintball mask compensates for this so it is in a comfortable position.

takatorikku · January 22nd, 2007, 02:42

hmm superglue eh? doesn't sounds long term to me lol, i was originally going to drill and bolt mine down.

edit: something along the lines of this:

course i don't have a spare eotech on my hands, so a laser will suffice

the best part is i can still aim with the handle optics and i can remove the rail if i need to adjust the scope as well.

thanks for getting me on the ball for doing this man lol

Amazing KG3 · January 22nd, 2007, 08:08

thats a good idea takatorikku, however mounting the laser there makes it so you cant use the iron sites.

Renegade) · January 22nd, 2007, 09:11

Well I think hes just using the laser to represent where a RDS will go, he just didnt have one when he took the pics.

Trader rating · January 22nd, 2007, 10:05

nice 504 in the background

takatorikku · January 22nd, 2007, 15:53

604 actually lol. and yeah, i borrowed my buddy's cheap RDS and mounted it on, looks sweet i'll have pictures up soon

bloodkoala · January 23rd, 2007, 02:26

not sure if i like yours as much takatorikku, it seems more versitile, but i looks odd being suspended over the carryhandle and having the large bolt sticking out the bottom... btw, amazing kg3, have you ever actually used the iron sights on your g36? they arn't that much of a loss

Amazing KG3 · January 23rd, 2007, 07:35

yes they are useless, but just the fact of mounting a laser on over the scope and giving up the iron sights just seems odd to me. it would have been easier to mount on the foregrip, which would still allow you to use the iron sights if the scope failed. it just seems unnecessary. it looks sorta good though.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 21st, 2007, 20:59	#1
bloodkoala Trader rating Join Date: May 2006 Location: california	My custom CA36 Finally finished the sub-mods on my CA36 (after a madbull tightbore) it, in effect, has a 9inch rail on the bottom that was designed for the m16, i cut it down and bolted it into place. it also has a small length g36 rail on top of the sight, as well as a V-type stock and some custom trademarks (i know they dont go there but it doesnt matter) coments/sugestions are apreciated

January 21st, 2007, 21:20	#4
takatorikku UnVerified Trader rating Join Date: Sep 2006	the dual optics looks nice. mind sharing on how you accomplished it??? i've been meaning to do that to my K version __________________

January 21st, 2007, 21:35	#6
DuffMan Trader rating Join Date: Feb 2004	Slap an Eotech or Aimpoint on that rail. Civie optics make everything look amatuer. __________________ "He resisted. I asked him to comply." "Telling him to 'eat it, bitch' is not really a request."

January 21st, 2007, 21:07	#2
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	nice. C&C rules

January 22nd, 2007, 00:28	#7
KraziAzn Trader rating Join Date: May 2006 Location: USA	NOD! __________________

January 22nd, 2007, 02:30	#8
bloodkoala Trader rating Join Date: May 2006 Location: california	the rds is pretty simple to instal, all you need is a short g36 rail (the kind that are tippicaly mounted to the sides of G36c's) take one of those and sand (or saw) down one of the screw runs (the plastic nubs where the screw goes on the underside of the rail) then just allign it above the scope with the shortened end on top of the raised part of the carry handle, apply superglue and voila! NOTE: with this applied, you cant adjust the sights elevation, doesnt matter to me because you cant use it with a paintball mask on anyway... to mr.ptrap the rds is a little high, but the cheekrest + paintball mask compensates for this so it is in a comfortable position.

January 22nd, 2007, 02:42	#9
takatorikku UnVerified Trader rating Join Date: Sep 2006	hmm superglue eh? doesn't sounds long term to me lol, i was originally going to drill and bolt mine down. edit: something along the lines of this: course i don't have a spare eotech on my hands, so a laser will suffice the best part is i can still aim with the handle optics and i can remove the rail if i need to adjust the scope as well. thanks for getting me on the ball for doing this man lol __________________ Last edited by takatorikku; January 22nd, 2007 at 03:05..

January 22nd, 2007, 08:08	#10
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	thats a good idea takatorikku, however mounting the laser there makes it so you cant use the iron sites.

January 22nd, 2007, 09:11	#11
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Well I think hes just using the laser to represent where a RDS will go, he just didnt have one when he took the pics. __________________ W1-5

January 22nd, 2007, 10:05	#12
Droc Guest Trader rating	nice 504 in the background

January 22nd, 2007, 15:53	#13
takatorikku UnVerified Trader rating Join Date: Sep 2006	604 actually lol. and yeah, i borrowed my buddy's cheap RDS and mounted it on, looks sweet i'll have pictures up soon __________________

January 23rd, 2007, 02:26	#14
bloodkoala Trader rating Join Date: May 2006 Location: california	not sure if i like yours as much takatorikku, it seems more versitile, but i looks odd being suspended over the carryhandle and having the large bolt sticking out the bottom... btw, amazing kg3, have you ever actually used the iron sights on your g36? they arn't that much of a loss

January 23rd, 2007, 07:35	#15
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	yes they are useless, but just the fact of mounting a laser on over the scope and giving up the iron sights just seems odd to me. it would have been easier to mount on the foregrip, which would still allow you to use the iron sights if the scope failed. it just seems unnecessary. it looks sorta good though.

My custom CA36

Upgrades & Modifications